Search results for query: *

does anyone make new window regulators for a 1967 charger?

wtb fasteners for rear beltline / pinchweld moulding fasteners for '67 charger. only need the 2 front sawhorse shaped smaller ones for each side, but would but whole set if needed.

i see some of the previous posts but i understand these fasteners are not made anymore. i have a '67 charger and need the 2 smaller sawhorse shaped fasteners tham. has anyone used anything else to hold trim. in picture the left 1 is the regular size that i have. the right 1 is the smaller rusty...

i bought new letters for hood '67 charger a number of years ago. don't know how to put them on. there is a plastic sleeve on tips. does it stay on or not? if it stays on i will have to drill holes bigger. if it comes off do i fasten letters on with push nuts? no threads on points. thank you, bruce

i am tring to repair button for console lite in '67 charger. the spring does not contact the positive wire in the plastic tubing. is there a piece missing. i can't find a diagrahm or replacement. any ideas? thank you, bruce .

i don't remember how these fit or attach. the stainless steel moulding under grill to crossframe and c-chrome around parking lite. did i do something wrong? pictures are from underneath and orange ear plug shows hole in crossmember. c- chrome is as tight as possible.

I posted for a chrome moulding for '67 charger. Response was $40 for moulding and shipping from Ken Trevor. Anyone know him or any thoughts? Bruce

I broke 1 sail panel trim on '67 charger. if I braze the break, can it be rechromed? or is there a better way to fix it? thank you, bruce

it's has been years since I remove trim and i don't remember how it goes on and of course i didn't take enough pictures. are there clips on pinch weld from door all the way to end of fender or is there other fasteners at the door end? from the door forward do use plastic clips and then bolts...

'67 charger with vinyl top, need v-shaped chrome trim for sail area. mccall, id. 83638

'67 charger. horn ring does not work horn. when horn is wire to battery works, when relay battery post shorted to horn it works. i have continuity from horn relay ground to harness to steering column. i do not have continuity from column wire harness to wire on horn switch. does this mean horn...

1967 charger, i have power to closing limit switch(black wire) all the time and draining battery with lights off and key out. and no power to open limit switch(green wire) with lights off. when i put lights on the the motors and limit switches do work to open and close doors. i did all the...

does anyone have pictures on how to put this together ? my shop manual doesn't show it. i didn't take enough pictures when i started 8 years ago.

'67 charger with vinyl top. i broke chrome trim trying to get it to fit. i tried ford metal epoxy but didn't hold on this thin metal(cast?). any ideas on how to fix or where to buy one?

'67 charger, 440, doug's headers, msd spark plug wires. do I need heat sleeves for msd spark plug wires?

'67 charger, what are these clips for??

'67 charger. been years since I took it all apart. I couldn't fine any pics. of them in parts books or shop manual. I think they go in grill some where. I couldn't find any pics. of where all the splash guards go either.

'67 charger. I can't find a source for the lower panel seal , that goes between trunk and bumper. and the lower moulding below grille. anyone know of a source? there on page 23-12 and 23-46 of service manual. thanks, bruce

seems like I am doing everything in the wrong steps. '67 charger , 440, doug's headers. do you use the same ignition wire brackets with headers as with exhaust manifolds? I have everything together and just bought the brackets. looks like it will be difficult to get the 2 "M" brackets on head...

'67 charger hood chrome . anyone had any luck reattaching theses brackets? can a small machine bolt be welded on bracket missing it? I don't have a spot welder.