Search results for query: *

Having issues with my carb flooding so i temporarily swap my 1405 for an old 1406 i had. While adjusting the accelerator pump the excess gas caused this hole(the bottom most on the first pic) to smoke. I looked at the 1405 and it has a plug in the same spot. What exactly am i looking at here?

Hello everybody, I finally got my magnum motor in my cordoba last weekend. Ive been taking it out this week and it runs great... during the daytime. This morning I used the headlights for the first time and the turn signal indicators on the dash both come on with the head lights. They still work...

Hey guys I am installing the intake on a 360 magnum, and I was curious if anybody here uses indian head shellac to help seal intake gaskets. Im not sure if it will stand up to heat well. Would I be better off installing them dry?

Ive always used gaskets as opposed to rtv when I can help it with good results. There are certain applications where I add silicone. A very thin film around intake ports, timing cover just to hold it to the block, BB valley pan hold down bars, PITA thermostat housings etc.. with the magnum motor...

At one of the shops on my route today I see a cool 66' dodge truck. I go to check it out and notice it has two side by side single master cylinders with a hard vacuum line off the top of the intake feeding a brake booster under the dash. Is there any real advantage to doing it this way? Im...

Hey guys im installing a 2001 magnum 360 in my 78 cordoba. I am about to order a bunch of parts including new motor mounts I was wondering if I should go with the stock mounts for an LA 360 of that year or the mounts for a 360 in a 2001 ram 1500.

I know truck vs. passenger car pans are different. I was looking to see if the pick up and pan from a 318 second gen cordoba would fit on a 360 in a first gen doba.

I have been been meaning to swap out the sloppy old 360 i pulled from a motorhome thats currently in my cordoba for a while now. Took a trip to the junkyard with low expectations. They wont let you bring in batteries and jumper boxes so i snuck in a motorcycle battery under my tools with a...

So i get off work today to find this... for no reason.

So not b body related. I picked up an 02 dakota about a month ago. I dont like "newer" vehicles but the guy that owned it couldnt drive anymore and sold it to me for $700. The trucks in real nice shape but the brakes were spongy as all hell. I would get nothing out of the pedal and then all of...

Anybody know where i can find an aftermarket shifter cable for a bigblock 727 on my 65' chrysler 300?

Leaving the parking lot(slick asphalt) from work today in my cordoba. Driving maybe 10 mph and when i hit the brakes the driver rear tire locks up leaving a visible skid mark. Limp her home with a hard pedal and pull off the opposite side drum. When the pedal is depressed one side of the wheel...

Bb 400 motor. Driven occasionally since i brought her back from washington a year ago. First time diving into this one. Probably the first time this timing cover has been off since 1972. Changed the oil less than 1000 miles ago. Any other thoughts before i pull these heads?

Hey guys so recently my 360-3 has been making some bottom end noise on start up. A slight tapping noise coming from the bottom of the motor. Ive heard plenty of rod knock, piston slap, worn main/ cr bearing noise. Ive heard rod knock go away and come back off and on, but in this case it only...

About 9 months ago i pulled a 360-3 from a motorhome and put the short block in my cordoba. Kept the old heads, oil pick up, oil pan, intake etc... Motor runs fine ive probably put 15k miles on it since. Just one thing, every time i run it around and let it sit for 10-30 min on a hot day in...

Service manuals for my 78' doba and an old school dwell meter. $15 for the lot. Also found a black n white pic inside of someones new cordoba.

Having charging issues with my single field setup. I used to have to run a ground wire from the voltage regulator to the ( - )on the batt just to get it to ground now it wont charge at all. My question is, what is the most basic way i can wire the charging system not including the ammeter. I...

Can anyone tell me if a 79 magnum rear bumper will fit a 78 cordoba? I do see some differences but not sure as to the width. Im not trying to go full white trash but 78-79 cordoba parts cars are real hard to find in decent shape these days.

Any body know the correct length of the caliper bolts for a stock 78 cordoba. I can grab the back of the caliper and wiggle it. Not stripped out it tightens up maybe just too long? Not sure if these are stock.

So im visiting my first love in storage today a 65 chrysler 300. I put a new o ring on the shifter cable but i cant seem to adjust it right. This car is far from a show car. It would never shift all the way into 1st gear. I pulled the cable all the way out, with the shifter in 2nd and turned the...