Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is 65 383HP 4bbl Flat Pistons Compression Height same as 68 383HP 4bbl Flat Pistons CH of 1.932" vs 1.934" or are they different Compression Height. My Block Number 2468130 Date Aug 8 64
Thanks
Does anyone know thread size for MOOG ES319L because change my old straight grease fitting to 90 degrees fitting. I tried 1/4"-28 it wouldn't tightening up. So I put my old one back in for now. I couldn't find reliable source for thread size, some say 1/4"-28, 1/4"-18 or 10-32. So I brought...
My dwell readings for 383
Innova 5568 Dwell reads 26, set to 8 Cylinders
My old Sun Dwell-Tachometer reads 30, set to 8 Cylinders
Points gap set to .017 with feeler gauge
I think my Innova 5568 dwell option not working correctly.
I like the reading from Sun Dwell-Tachometer
What is correct color for 68 Carter AVS 4401s Automatic ID Tag. Is it natural aluminum silver. Because in MMC Detroit Restoration Reference Manual it says 1969-73 Carter AVS Red tag for Manual Transmission, Blue for Automatic Transmission. Carter AFB Black tag for Hemi. Doesn't say anything...
How thick of carb spacer can i go between 68 MOPAR 383 factory intake manifold and factory carb 4401s with factory choke because carb got hot after long road trip and idle for 30 mins, then died when i hit gas pedal
On my 68 charger top of door window stainless steel trim lifts up as I roll window down, also top of my window in the rear in little far, I have already tried adjusted lower rear channel nut to tip top out didn't change anything it stay same. My quarter window aligned perfectly. Also tried...
What is correct stock 8-3/4 Rear Axle Leaf Spring U-bolts length for 440 engine use 6 full spring leafs on left side and 5 leaves plus two 1/2 leafs forward of axle on right side. Is it 7-1/8" or 7-1/2"
Does lower ball joint bolt go from back through lower ball joint thread into spindle? Because I have David Wise restoration book one of the photo shows bolt goes through lower ball joint into spindle