Search results for query: *

This car has less then 1 mile on it since being finished. Hasn’t been over 20 mph. I have the side glass and front windshield gasket, BUT, it will need a windshield. 446CID, stock crank and rods (drilled and ARP studs used), Edelbrock Heads, Edelbrock Intake, Demon 850 Carb, Hooker Super Comp...

Looking to trade for a 63 Plymouth, 64 Plymouth 65 Dodge/Plymouth Station wagon. Pro Street, Tubbed and cages are fine with me. I’m looking for a street car I can get in and drive. I’m looking to trade my 1964 Savoy, Dana 60 4.30 pro gear, Strange axles, spool, 444cid, edelbrock heads and...

Brand new never installed Nickel chrome plated headers for BB. $600obo. Will ship.

Error

Purchased these from a guy who had them in a dyno, I took them into a very reputable shop who freshened them up and did some light blend work. Ready for your cam Springs and run. I have $2200 in these heads. $1600obo. Will ship at buyers expense. I’ve got the valves and retainers...

1965 Dodge Coronet 440, Dana 60, 3.55 Sure Grip, 35 spline axles, tubbed, frames tied, QSI Tubular Upper and Lower Control Arms, QSI Strut Rods, all new steering components. Willwood front disc brakes, 15x10 rear slots with Mickey Thompson 31X16.50 Sportsman Pro, 15x4 front slots 28" Mickey...

Body and paint complete... Assembly begins, slowly.

Completely restored fenders, correctly repaired and ready for block and paint. New grill as well. $1200obo. Located in Wichita area. I am in KCK and SW MO monthly. Can deliver if needed.

I moved the springs in and tubbed the wheel wells to the frame. I have some 15x10’s on some MT 32x16.50 and they fit. I have some 15x14 slots I was going to use with the same size tire. Will I be hitting the frame. The plumbbob shows about an 1-1/2 on one side and 5/8” on the onboard side...

Starting my spring cleaning in the shop and came across a block with the following: 1228 T-41 on the front pad. 2406 R.L. On the side of the block 10 1 62 Just looking to confirm.

I picked up a Mopar Performance 426 Hemi that needs the oil passages drilled. Does anyone have a good recommendation to a machine shop who could do this? I am in the midwest. Thanks!

I started out with correct steel rims for the 65 Dodge, but I recently switched gears and went with my favorite wheel... Going in to have the jams painted Saturday. Installing a fresh 440/727 and driving the $hit out of this thing!

1964 Plymouth Savoy Station Wagon Project. Floors replaced, mini-tubbed, front cook replaced (needs spot welded in), passenger doors and tailgate are ready for block and paint, have set of drivers doors that will need worked. I’ve got a nice hood with max wedge scoop. Car is disassembled. V8...

1965 dodge 440 comes with 440 engine (Bored .030) with aftermarket Pistons (L2355F Forged) stock rods, stock turned down crank, Edelbrock Performers RPM intake, NIB MSD 6AL box, NEW TTI headers 727 transmission (needs rebuild). Fiberglass front Bumper with the aluminum Brackets, steel bumper...

i picked up an 06 5.7 hemi yesterday. Turns out the block has a hole on the side. I was able to save the heads and intake (Chrysler 300). What are the heads and intake worth? The seller has offered to take it back, but I only paid $200 for the entire, complete engine. Thoughts on the heads...

I’m building 3 cars at once, which is daunting in and of itself. Decisions, decisions, decisions... Disc brakes or drum? 727 or 4 speed? Dana 60 or 8.75? Big Block or ??? I’ve always been told that small blocks are for A-Bodies, big block or small block is acceptable in E-Bodies, Big Block...

https://www.summitracing.com/parts/dcc-4532174 Can someone tell me anything about the Mopar Performance Intake 4532174? I am building a street 440 and have this intake in my shelf. Gonna run some 906 heads, 6 pack pistons, thinking about the Hughes Whiplash cam, 727, 3.55 gears. I’m open to...

https://www.summitracing.com/parts/dcc-4532174 Can someone tell me anything about the Mopar Performance Intake 4532174? I am building a street 440 and have this intake on my shelf. Gonna run some 906 heads, 6 pack pistons, thinking about the Hughes Whiplash cam, 727, 3.55 gears. I’m open to...

stock width, stock spring location, 742 Case, 3.91 Gears with Spool, Strange 35 Spline Axles, Reinforcement Brace, Jegs Filler Plug and drain plug. Prefer not to ship, but I can to lower 48 States. Near Wichita, KS. $850

318/727, recent tune up. Trans leaks and is slipping. I have another 727 (core) I’ll throw in. New wheels/tires, exhaust, disc brakes, aluminum radiator. Clean title. 1800obo. 400 complete and bb727 available for an extra $500. Located near Wichita, KS. Also may sell a 65 Plymouth ($700)...