Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
A few years back, there was a guy that was popular on this page for rebuilding break cylinders. He was out of Fort Worth Texas and had some videos on YouTube.
What was his name?
I believe I need to change the driver side motor mount but I have questions.
I want to roll the engine to the right by jacking up the left side by the dust cover.
Do the bolts on the right have to be loosened or off?
Do I take out the entire bracket the mount attaches to… the one that bolts to...
I’m looking for the breather hose for a RamCharger 69 Bee/383… from oval air cleaner to left side cap.
Do they sell repros?
If not then what is the length of that hose?
So I recently purchased these after having to replace the inner axle seal
I originally had a company in Ft Worth do the axle during the resto process.
I believe it was put together wrong.
The metal gasket was on the outboard side of the backing plate in between the axle assembly
Doesn’t it go...
This is my distribution block for my brakes. I have a slight leak somewhere on the block. The area circled in the pic is where the wire hooks up. If you take the small jam nut off that holds the black spacer in place the small threaded rod just spins.
Is that normal?
Is there the possibility of...
I have an after market tank with an in tank fuel pump and have never hooked up the vent lines. I’m trying to finish a few things up before she gets put up for sale.
If I’m filling my tank and fuel is coming out of one of the rubber fuel lines currently connected, should that be the one that gets...
I have an after market tank with an in tank fuel pump and have never hooked up the vent lines. I’m trying to finish a few things up before she gets put up for sale.
If I’m filling my tank and fuel is coming out of one of the rubber fuel lines currently connected, should that be the one that gets...
This was in my car but not on my car when I bought it. I can’t find any #s on it at all. I do not need it. If anyone is interested in buying and rebuilding it’s there’s for $30+ shipping.
Let me know what you think it is to.
Wires have to be pushed through bulkhead
Bulkhead shown where wires push through
Not sure what the brown wire are for at bottom of pic
The black and red wire is still soldered together for the Mad Electrical Mod
The yellow wire needs a connector for the door jamb switchand not sure how long...
Compcam xe268h-10 used for break in and then made some changes
Lifters 822-16 never used
Fuel pump pushrod MRE5249569 never used but plug is missing
$75 + shipping from 63385
I am finall going to pull the trigger on a set of 17x8 TorqueThrust rims. For the rear, do you want a positive or negative offset? The pic shows the 3 choices available. For a 69 Bee.
Which way does the seal go on with disk brakes?
It’s a red seal with a soft black rubber seal.
I bought these from Doctor Diff. He says the 2nd pic is correct.
The first pic is a screen shot from The Ram Mans video. It’s already on the spindle and that would mean the last pic is correct...
69 Super Bee with Torque Thrust rims
I am going with a 17” tire and I am opting for more profile than I am width.
Front... 215/55/17 on 7” rim
Rear... 235/55/17 on a 8” rim
Any thoughts on backspacing as well.
ALL COMMENTS WELCOMED.
I’m surprised I’m doing this but I am moving from Texas to Missouri. I thought about hauling the car on a Penske trailer but the weather up there is still blah.
Who do you guys recommend for enclosed transport of my Bee?