Search results for query: *

Afternoon, Looking to buy an automatic console for my 68'RR...I am swapping into an automatic from a 4speed. I appreciate the help, Eric

Looking for a stock complete pinion snubber for 68 RR 8 3/4 742 case...Thanks in advance. Eric

I am looking for a bracket for my vintage air compressor that will allow it to be used with the 440+6. As some of you may know, installing the bracket that came with the system is too high once mounted and interferes with the +6 air cleaner. I know they have to be out there. Any help or remedies...

Looking to buy a nice M1 intake for my 440. Let me know what you have. I appreciate the help. Eric

Afternoon, 68'RR, front bench seats. On the driver side, when you fold the seat forward so someone can get in the back, it falls off the pivot point on the left by the seat belt next to the door. Is there suppose to be an "E" clip or something to keep it from unhinging there? Any help would be...

Evening, Looking for a passenger side only door locking mechanism pull/push. Greatly appreciated. Eric

Looking for a dash light dimmer switch for my 68 RR... Thanks in advance. Eric

Evening Guys, Looking for the parts shown here...Any help would be appreciated. Eric

https://www.legacy.com/obituaries/heralddemocrat/obituary.aspx?pid=197505840&utm_source=facebook&utm_medium=feed&utm_campaign=heralddemocrat&utm-content=197505840 For those of you who knew him...This guy helped a lot of people find the parts they needed for their projects.

Looking to buy a pair '68 RR front bumper parking lights(both housing and lens)...appreciate the help. Eric

Installing my grill on the 68'RR...What does the bottom right driver side and bottom left passenger side headlamp screws mount to? Please see pics. Thanks for any help. Eric

Have a 68 RR and just installed the engine/trans under the car. All 4 K member bolts aligned and started. But the rear motor mount is about 2-3 inches off from the transmission crossmember mount. Any ideas here? 69' 440 with an A833 18-spline transmission late 69. C99129

Have a 68 RoadRunner 4sp with bench seats...Looking to add 3 point seatbelts for the front and rear; what are my options? Earlier or later year belts welcomed if they will fit. Thanks a lot for the info. Eric

Looking for the rear/passenger side bumper bracket. Any help greatly appreciated. Eric

As the title states, looking for the Cross Ram intake with the long runners that came on the early 60's 413 engine. Let me know what you got... Thanks a lot, Eric

Looking for a decent M-1 Intake for my 440... Thanks in advance, Eric

Good Evening All, A new 30x60 shop building is going up and prior to moving all my projects/stuff in the shop, I plan on putting some type of epoxy/paint on the floor... For those of you that have done this or have any experience, I sure could use your recommendations. I want to seal the floor...

1968 RoadRunner 4 speed car. Never done this before so thought I would reach out and learn from those that have the experience. I am in the process of putting the complete interior back together and looking for a sequence/order to do so. Everything from the pedals, steering column, dash...

Looking for a running 383 or 440 to drop in my 68'RR 4 speed car. Let me know what ya got. Prefer HP block mid/late sixties. Thanks a lot, Eric