Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello guys!
What are reliable clutch options for street use with Tremec gearbox. Engine will be 440/512 stroker, Eddy rpm heads, KB Hyper pistons. On paper it should reach 500+ hp and same torque.
My goal is to get softer pedal than original that can handle all power.
What are you using on...
1970 Charger with automatic column shifter. There is slight movement in gear selector, when turning wheel. Close to switching gears when wheel is turned. Problem is somewhere in steering column with loose nut/pin/spring etc
Maybe someone had similar problem and already know where's the problem...
Hello guys,
Searching for perfect gearbox for my 440/500 stroker 600+hp build.
Has anyone used Tremec TKO 5 gearbox?
It's not cheap so before buying would like to know options for best price/performance options available.
Thanks!
Searching original or NOS parts for 68 R/T 440 charger A/C system:
1. A/C Heater control valve without vacuum advance like it is on 1970 Mopar
2. Passenger side Lower A/C Dash Cover
3. Heater box diverter to center dual A/C vents
4. A/C center duct
5. Dash A/C Air Duct Vent Tube. Both...
Searching original or NOS parts for 68 R/T 440 charger A/C system:
1. 68-69 Charger AC/Heater control valve
2. 68-70 Charger Dash AC Lower Cover
3. 68-70 Charger AC heater box diverter
4. 68-70 Charger A/C CENTER DUCT
5. 68-70 Charger Dash AC Air Duct Vent Tube
6. 68-70 Charger AC Blower...
Hello guys!
Searching for RB 440 block with main caps. STD bore would be best, but you can offer what you have. With or without crankshaft. If it needs to be bored - no problem. Without cracks.
Thanks!
Hello guys
Searching for parts for my 69' 440 Charger
- suction hose from expansion muffler to firewall
- exhaust side flange where suction hose is bolted
- hose from compressor to condenser
- short hose from dryer to firewall
If anyone has something PM
Thanks
Looking for some parts:
- A/C lines for original R2V compressor. rubber can be in any shape, main thing that they arent bent or damaged ( metal lines, expansion tank etc) - three hoses needed for big block 1969 charger
- Woodgrain steering wheel - not bent, trim in any condition for 1968...
Hello guys!
Sorry for new thread, cant find anything similar...
So Im stuck with these parts. At first thought they are from front grill, but cant find them in my pictures...
They are from 70' charger.
Any ideas?
Searching for a new A/C panel lower central part with vent holes in BLACK. Or anyone knows where I can buy new?
Searching A/C fresh air duct ( under dash, passinger side ) - new or in really good shape ( no holes and rust )
PM
Looking for a new automatic transmission for 318 engine ( 70' charger ). + converter. What stall I should take? Where I can purchase full kit that will fit directly? any suggestions? Whats your experience buying new transmission?
Engine is freshly rebuilt, with 256 int./262 exh. camshaft...
My 70' charger heads needs an oversize exhaust valves. If Im correct, last oversize valve stem diameter is 0.372' / 9.45mm.
If its >0.372' then whats the options? Valves from 340 or 360 heads? Make bore for valve guides? Change heads?
Help!!
Hello!
Can't find anywhere where to buy - A/C fresh air intake hooose, for mopar (1970 charger)
Googled/searched - nothing. Please help. My heater box needs to be done.
Hello guys!
Started to rebuild my 440 engine.
In the beginning plan was simple - change couple of gaskets, oil pump, piston rings, bearings etc, After some measurements block needs overbore and camshaft needs to be changed.
We all know - stock is boring so what would be the best to do...
Hello, everyone!
Decided to order intake kit for 318 engine.
- https://www.summitracing.com/int/parts/cmb-03-0162
- https://www.summitracing.com/int/parts/cmb-03-0160
Each kit is with different camshaft. Which one is better for stock block?
Engine will be for daily drive.
Thanks!
Hello everyone!
Im looking for new original headlights for my 70' charger.
Looked everywhere - classicind. summit. etc., there isnt any 5 3/4, with H4 bulbs, "not sealed" with "E" markings and without upgrades ( LED bulbs, xenon etc).
And why, if I select charger 1970, they offer me 7'...