Search results for query: *

it would be alot easier to try to get a 66 column and sell the 65 all together they are getting hard to find, i bought a used 66 column this summer paid 50.00 just replaced turn signal switch

I have a sure grip there is a number stamped in it 23591X it's only 10 bolt for ring gear, 8 3/4 is 12 bolts any one have any idea what this would be for. I do realize the second number is manufactured date

already broke cam in, just want to do some pulls, we suspected something wrong with dist in motor and the only spare i have is electronic igntion so i know i have to hook box up

Bob My question from the begin was can i run it on a dyno with out ballast resistor, there's no alternator on motor just distributor possible run time of 1/2 hr and not at same time thanks Charlie

Hi have a 440 its on the Dyno, and we think we have a issue with the distributor and its a plug and play unit, i want to change to see if it makes any difference but the only spare i have is a Chrysler electronic one so i have to use the box with it as well, but do i have to use the ballast...

off they web site INDY CYLINDER MAKE PLANS TO ATTEND OUR. 27th ANNUAL CHRYSLER PERFORMANCE. TRADE SHOW & PARTS SWAP MEET. MARCH 4TH & 5TH 2022. SET-UP MARCH 3rd ...

i have a max wedge, wondering what to use to lift motor into car with crossram on it im putting in from the top thanks

The hose you have 23055 where did you get that one from, that's what I need thanks

i think this where i got mine it was made in the USA i used a couple of chinese crap ones through them out and haven't had any trouble, it been in the car probably 5 years, just check ebay but make sure its made in usa this where i got it Old Car Parts NW, Inc it was NOS

Has any one used the new molded big block windage tray, it says is reusable and do not require gaskets, its the Mancini Part# 20998 looks really good has any one had and experience using them does it require silicone on corners anywhere Thanks, Charlie

Contact Joe Suchy he in Fairburn Georgia 770 964 4441 [email protected] he has correct breather and pcv valve

No problems at all, did you receive a confirmation email after you ordered. id call them

Can anyone tell me what year these valve covers are. Thanks

Vans has pan for 300.00 and pick-up is 90.00 It's 3/8 and they fit great. Joe Suchy sell them also They are correct for max wedge clone. I have it on a 440 block And do not have to notch or cut cross member

I have a 8 3/4 center section it does not have any numbers on case. the gear is a 3:91 non sure grip came out of a 64 pick up, would it be the same as a 742 case?

TE="RSZ28, post: 911667504, member: 14411"]If a repo max wedge pan is used, what oil pick up can be used? I haven't seen any advertised for max wedge pan. Vans auto has the pickup for max wedge pan 90.00 I bought one in March and a pan

Joe Suchy or Jim Kramer's has the speedo grommet

let me know if this is better, I can email also

Firewall hole is 7/8 dash hole is 1/2

this is the template for Cable hole