Search results for query: *

This is a reproduction trunk divider panel I make. It is made from 1/2" Marine plywood so it will last. This one has the chrome trim and also the hinge and the 2 catch bolts. It has all brand new captured threaded inserts and fits exactly perfect. It is painted 2 coats of a nice satin black...

HI, Since I cannot find a decent used inner trunk cover for my tail lights and it appears there is no repops to be had, I am thinking of reproducing these myself. But what I need is a few nice clear photos of what they look like. If anybody on here has a correct one installed in their 66, I...

OK folks who have been following this thread. I have been trying hard to solve this issue. I checked and replaced my starter with a new mini starter. I replaced my starter solenoid switch. I checked all the connections and made sure they were all clean and tight. It was then mentioned on here to...

What would cause my front light wiring to melt in a matter of seconds? Right down to bare wires for about 2 feet from the headlight and also the side marker light? Key was in the on position. Car would not start in the start position only making a buz at the starter relay. I removed the...

Looking for an original or a repop taillight inside trunk finish cover.

Looking for the switch for my 66 that keeps the rotating headlights open or closed. Has a chrome toggle in the left side of the dash? Anyone got an extra they want to sell?

Looking for the 66 charger rotating headlight hold open switch that sits in the dash. Has a chrome toggle that switches up] and down. Anybody got one they would like to sell?

Doing a resto on the steering column and I lost the screw that holds the directional arm to the new turn signal switch I installed. I was wondering if anyone on here knew what type and size? Also, is there somebody who just sells the spring that goes inside the column joint to hold those two...

Looking to replace my 66steering column harness with a non cut original? Pictures please.

I bought a ready to run for my 383 and was curious about hooking it to the 6AL MSD ignition box and what the advantages of doing this? MSD says the RTR distributor needs no ignition box but they also show a diagram and say the RTR can be used with the ignition box? But they do not clarify why...

Looking for a pair of 66 charger heater control knobs for a non a/c car. Need to be clean. Thanks

Hi, getting to my dash now. I have no radio in it. Is there a radio I can install with the bluetooth and serius to work with the EL lighting or maybe look like the EL lighting. I don't want to look for a stock radio as I prefer bluetooth and hands free phone. What has everyone here done for...

1970 Dual snorkel air cleaner. Has been blasted, primed and recoated with the wrinkle finish as shown. Comes with the brand new repro 383 magnum pie plate in hemi orange color. $550 plus he ride.

These are the clips that hold the 66 hood moulding as well as the lower grille moulding. We did them in stainless steel. I have a few sets left. They are $170.00 and shipping to you is FREE. While supplies last......

does anyone know what the correct bulb I should be using in my 66 Charger front console. Has a lamp on both sides and it is missing the bulbs. Auto parts store sold me 1156 bulbs but they are like 32 watts and seem to be for something much bigger. I don't want to burn the plastic lens with...

Hi, Installing a quarter panel using a central pneumatic flanging too. No proble making the offset flange, but when I lay the AMD quarter in place it appears to project out as such that if I grinded it smooth I would reduce the panel guage by about 50%?? Now that is not acceptable. Do I...

Just pulled me console front and wiring. Automatic car. It appears top have an electrolumence shifter lighting. But the actual shifter lettering seems very faded or dirty. I was curious if anyone here restores these or can I clean it myself without messing something up??

I am in search of a couple of the sheetmetal clips that fasten the two nuts and studs at the bottom of my fenders. I would like to find the same clip as they are not the same as what is being sold. They are more heavy duty and have bends to make them more solid. I have brand new studs and...

Hello, Just installing my 66 doors. I wanted to ask. My drivers door has the small star wheel on the bottom of the hings and my passenger door has them on the top of the hinge. Also both hinge pins have the crowned end on top. Is that correct??