Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi all,
I found a good deal on a 1967 383 block close by, but it's already bored .030 over and the cylinders are pitted a bit and probably will need another .030. Do you think the block could handle another hundredth over that to get it to 4.32, and would I then be able to use standard bore 440...
Hi all,
Just wanted to get some thoughts on a stroker build I'm thinking of doing. I'm going to be getting a new Jeep for driving in the winter, and I'm planning on swapping in a 46re and 5.9 magnum from a truck into it. Originally, I was thinking I'd leave it a stock bottom end and just put a...
I’m pretty savvy with electronic ignitions and the wiring for the systems in our cars, but I cannot wrap my head around something and I feel like I must just be missing something obvious. If the ballast resistor was originally implemented to limit the voltage at the points of a mechanical...
How does everyone suggest going about replacing the k member isolator bushings on a 74 roadrunner? I really don't want to pull the engine. Would I be able to just jack up the front by the frame rails and then put a jack under the k member and disconnect it, lower it a little bit, replace the...
Any tips on driving the pin that the self-adjuster lever rides on into the new shoes? Both the hardware kit and the shoes themselves came with the pins, so I've got some extras if I mess up, but trying to press them in with a clamp doesn't seem to be working too well and I feel like I'm going to...
Any recommendations for front shocks for a 1974 roadrunner? There aren't many options out there from what I can tell. Don't need anything super fancy, just want something that'll ride okay and handle okay. Looking for middle of the road between performance and driveability. What I'm seeing...
Looking for a set of valve covers for a small block. The ones that say "direct connection" on the tops. Chrome doesn't have to be good because I'm planning on painting them, that's why I'm looking for a used set first because that feels better than paying full price for a brand new set and then...
Has anyone tried opening up the fake hood vents in the front of the 73-74 roadrunners to push cool air towards the air filter? Seems like it wouldn't be super difficult to me with the way the hood bulges and is constructed underneath. I guess it could be a problem when it rains, but maybe I...
Hey everyone, I've got a question about peoples' experiences using different body mounts/isolators/k-member mounts on the 73-74 cars. I've found bits here and there on it, but I haven't seen a ton of actual, detailed experiences written about by people using the different options out there. I'm...
Planning a suspension rebuild/service soon. Going to be getting a PST kit for most of the soft parts up front and the tie rods (talked to them and they will swap in the 11/16th c-body TREs and adjusters instead of the 9/16ths for no extra charge - not super relevant but I thought that was some...
Want some recommendations/advice on my build I'm starting up. I have the basics pretty much set, but some things (specifically the valvetrain) are still up in the air.
I'm aiming for a streetable car with a very good lowend that will be fun and fast but still drivable near daily. That being...
Got the car a few months ago now, and the dash lights never worked. I put in a new cluster the other day that was given to me when I bought the car because it was in better shape than the cluster in the car, and I started working on the dash light problem. I found that the fuse had blown. So, I...