Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone know this car/owner? I got these pics from Mr Norms Club Website and was taken at Carlisle. THe caption said it's Paul Ernst from Buffalo, New York.
Has anyone, or know anyone, who has tried a GearVendors unit. I have a 727 with a TF2 shift kit, 8-3/4 S.G. rear w/3.55 gears. Has anyone had any problems or concerns with this?
Would love to have an OD in my 73 Dart. Would prefer NOT to do surgery to fit a bigger trans in the tunnel. THe GV...
Just curious if anyone had tried this. My red wire is melted, the amp gauge is brown (white face overlayed), the light bulb socket is melted and the circuit board is discolored.
http://www.madelectrical.com/electri...p-gauges.shtml
http://www.autometer.com/tech_faq_an...px?sid=1&qid=5
I...
Do these Lock up converters have different stalls? I have a 727 with a 2300 stall converter but going to a 518 but this has a lock up that I have to wire for. Do all manufactures make these converters?
Thanks...
I got a set of 3.31's put in my 741. Since then I have a noise. It sounds like a rattleing/rubbing, it kind of sounds like when you taped a playing card to your bike for the spokes to hit it. I have the limited slip addative in it. It doesn't sound like any bearing I've heard before...
I have seen this rear...THIS IS an 8.75 rear, case pulls out the front, smooth back (no plate or bolts), non-sure grip. My bro used a putty knife to scrape the crud off it then used a wire brush trying to find numbers. NO markings. This was really a 318/904, 1968 Dodge Charger.
OK...
I got a Mancini Distributor (non adjustable vacuum advance). I wanted to be able to FINE tune my timing so I replaced the non adjustable with an adjustable. When I started my Dart, I got a big 'pop', not like a back fire.
I disconnected the vacuum line to the distrib and restarted...
My brother has an 8 3/4 rear out of an 68 Charger origionally a 318 car (honest). The center section has no markings or casting numbers on it. Has anyone ever heard of this? If so, what rear (pinion Diameter) could it be, 741, 742, or 489?
Not sure if this should be in this forum and I know it's an A body, but the principle should be the sameand no one over at FABO could help me...
What should the pinion angle be for an A body with an 8.75 rear? And how do I check this ?
I'm getting a vibration at 55 and it comes and goes like...
I use the 'Trim Shine' by Stoner. http://www.moreshine.com/
Initially I used one whole can on my Dart, left it sit for a few min then wiped it down. Now I just give a light spray on and wipe off. Doesn't give that heavy armor all oily shine. I know people have won 'Best Vinyl Top' awards...