Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1974 Charger
Looking for a 15” rim to be used in the trunk as a spare.
Having trouble finding one With correct back spacing.
I am in the Minneapolis area.
would prefer to pick up if possible.
Looking at putting on a Gear Vendors unit on the car.
I do ALOT of long road trips 200-300 miles.
RPM at highway speed is too high.
Looking to reduce RPM & increase MPG.
Looks like a great bolt on solution.
74 Charger
318
904 Tranny
3.21 Rear End
27” Tires
Anyone done this in a 74 Charger?
Any...
Can anyone tell me what the correct
size screws are to fasten the lower door panel.
(circled in red)
Previous owner neglected to put them back
on both sides. I hate hackery.
74 Charger
74 charger 318
Has original front sway bar.
No rear sway bar.
Looking at adding a 3/4” rear bar.
Will that size bar play nicely with the factory front bar?
Installing some digi-tails in the 74 Charger.
Wiring diagram looks like this
Here is what I have
Can anyone tell me which wires are which?
It says there is supposed to be a yellow wire but there is not.
Any help is greatly appreciated.
Looking at the Digi-Tails led kit for my 74 Charger.
Has anyone here installed these on a 73-74 Charger?
If so, how do they look/work.
How was the install?
Thanks for any input.
74 Charger 318 original engine.
It has the wrong dipstick in it.
The dipstick is 21 inches long, which I
believe is correct. The problem is the
FULL & ADD marks are way off after
checking after a fresh oil change.
It reads as if the engine has way too much
oil. Does anyone have measurements from...
74 charger 318 2 barrel
Auto trans
Factory A/C
Planning on using an LD4B intake.
Carb undecided as yet.
Will this just be a bolt-n-go or will I
need to make any modifications?
(Electric choke, trans kick down, coil, etc)