Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I know that Bruce Toth makes an adapter for SRT manifolds on a 318 Poly, Has any ever seen SRT exhaust on an LA engine?
I have a few sets of the SRT exhaust, both Dodge and Jeep and was wondering about the possibility of using them on an LA engine.
This is in my '70 W200 so room is not an issue.
I am doing some clean up on my engine compartment. Just had my intake manifold coated and am in the process of reinstalling. The intake is an Edelbrock RPM Air-Gap. I have always used carb spacers/insulators to help prevent vapor lock and hard starting because of fuel evaporation due to heat...
Not sure this is the appropriate place to post this but since it is '62 specific I start it here. This is a '62 Plymouth 4 door to 2 door wagon project that I think is really cool. After some negotiation I would probably be a buyer IF I didn't already have a '62 Savoy 4 door to 2 door project...
Given all the issues that seem to exist in the market with lifters these days I am considering a roller cam for my 400 build. It will be a very mild daily driver and looking for torque over HP. I have looked extensively but can not seem to locate an off the shelf roller cam from any of the...
I will be traveling from Houston, TX to Santa Fe Springs, CA (LA area) the week of April 18th. I will be pulling a 6 x 12 enclosed trailer. Trailer will be empty on the West bound leg but will be full on the return. If you need something transported let me know. Not interested in fighting LA...
I am looking for recommendations for competent and knowledgeable mechanics shops in the Las Vegas area. I am purchasing a car in Las Vegas and driving it home and would like to have it checked out and minor repairs made to make sure it is roadworthy. I can do most things in my shop at home but...
Factory intake for 440 with thermoquad. Casting number indicates '74 - '76. No cracks or repairs, threaded holes all look good.
$50 and you pay shipping from 77379.
1969 440 HP engine. Missing cam, lifters, pushrods, oil pump and drive, distributor, balancer and carb.
Removed from a '69 Charger 500. Rebuilt in late '70's and bored .030 over with a 10/10 crank. Was told it has approximately 2k miles on rebuild. Car was totaled shortly after rebuild and...
I am looking at a pair of '66 Barracuda bucket seats and am wondering if the frames are the same/interchangeable with 63, 64, 65 B bodies. I think seat foam may be different but the frames look similar. Anyone had any experience with this?
Wanted new hydraulic lifters for 318 LA. Given the recent situation with lifters I would like to purchase NIB hydraulic lifters that are 3+ years old. Please let me know what you have. Shipping to 77379.
Thanks
Glenn
Looking for new in the box never run hydraulic lifters for 318 LA. Need to be 3+ years old. Trying to avoid some of the current lifter issues. Would need to ship to 77379.
I have a set of Isky lifters 3912hy that were purchased for a BB. Wondering if I can use them in a LA 318. Isky list the lifter for the LA as a 3912 A HY. Anyone had any experience with this ? I know the diameter is the same just wondering if the height is the same?
I have the pan off as well as the timing cover. Trying to decide if I should put the pan on first or the timing cover then the pan. Opinions, rational?
I am looking for information on weight bias/front to back on early 60's Mopars. I have several and know that they are front end heavy. I am trying to figure out the best way to go about improving the handling and braking as it relates to weight bias. I know all the things you can do to remove...
I am considering adding to the collection but it has been so long since I have purchased anything I am out of touch with current prices. I am looking at a '65 Coronet 440 more door and need some opinions on value.
Anyone using an HDK suspension on their '62? I want to purchase one with the '66 and later engine position. Just wondering if anyone has had any experience doing this.
I am going to refinish my aluminum intake and have been looking for options. I prefer to keep it a cast aluminum look and don't want to use paint, even the aluminum type. I have a company that can put a clear coat on it that they guarantee not to discolor and is good to 1200 degrees F but kinda...