Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I installed the rear bumper yesterday. I put the brackets on first and then fastened the bumper to the bracket. I installed the bumper guards first to hold the bumper onto the brackets and then I installed the bumper bolts to each end. Once hand tightened , I lined everything up and tightened...
Thanks for both comments. When I removed the bumpers by myself, I set jack stands under the bumper to hold it in place while I removed the brackets. When I was laying out my newly rechromed bumpers and bolts, I forgot how light the bumpers really are, and it gave me the idea to install the...
I want to know what is the best way to re-install my bumpers and brackets? Should I install the brackets onto the car frame and then install the bumper or does it make sense to install the brackets onto the bumper and install as one unit?
I removed years ago when I started my restoration and...
Just spoke with them and they have 5/8" long , Part# 94105A316 (Pack of 50 for $10.85) or the stainless screw is #94355A198(pack of 25) for $6.82.
So once installed into the molding, I should have 7/16" remaining on the stud to accept the nut. So I will probably go with the stainless part. I...
All good points. My original idea to use a stainless screw, screw into the molding for fit, cut off the head and get the nut in place, then remove and re-install and see how well it holds before I reinstall the thread with loctite. I also was thinking I could install the screw on with loctite...
I bought a new pair of C moldings for my 67 Charger from Year One. Year One advertisement stated that they don't provide the hardware. There are machined studs that screw into the C molding and you secure with a nut. I want to know if there is a source for the 8/32" threaded post that is...
Are you still looking for the bottom rear window trim piece for your car? I had bid on ebay for 4 piece rear window trim for $159 and won the item. The Seller had a difficult time to mail to me, so I cancelled my bid and he refunded my money. The Seller handle is cady_fat_cat. The item number...
You were right, it is a welded threaded insert. Whomever had my car before either punch it out or wore it out with too many battery changes. Thanks for your input.
Wow, I wasn't expecting that, I guess I will have to weld in an threaded insert or just bolt it in with a fastener. Thanks for your help and taking the time to take the picture. Very much appreciated.
I want to confirm the correct fasterner to use to fasten the side battery tray bracket at the top of the interior fender. I am putting the car back together and of course didn't take a picture BEFORE I removed the fastener.
There is a SQUARE notch on top, see picture. I also have a SQUARE...