• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. A

    Need some help.....

    But the KB400 isnt designed for the 516 head either is it ? And when figuring compression your not calculating at zero deck, your adding the positive displacement of the dome. But yes I understand how the flat portion of the piston needs to be at zero deck to properly measure how many CCs the...
  3. A

    Need some help.....

    Im a body guy not an engine builder. Its a legitimate question. Isnt the dome still to big for a closed chambered head ? Especially if the dome sits out of the bore ?
  4. A

    318 runs fine then starts pinging, then floods w/gas and stalls-?

    How old are the plug wires ? Also could have a ECU box going out. Low spark will cause it to load up with fuel.
  5. A

    Carb replacement question

    To use a different carb you may need to open the holes up a bit to clear the throttle blade of a aftermarket carb I know the Edelbrock 600 will clear a 67 383 intake, But its smaller then the stock carb. I like to use stock stuff myself, Theres plenty of power in there with some tuning. You...
  6. A

    Need some help.....

    How do you get zero deck with a domed piston ? Its going to have a positive deck height because of the dome. Is the dome going to clear the closed chamber of the heads ? Piston choice for 383s are limited, You would be best off getting something custom made if your really worried about quench...
  8. A

    Best cam kit for smogger 340

    A big heavy car with low compression, keep the cam small. What size rear tire are you running ? I would look at the Comp Cams XE256 or 262 or the Voodoo equivalent.
  9. A

    SLP Loudmouth Mufflers on a 360?

    The Loud Mouths 1's are just resonators arent they ? I know there are 3 versions of them,
  10. A

    76 360 compression?

    I would say it would probably be in the 120 range if its stock. They have pretty low compression ratios, like low 8s. Whats more important is that you have the same psi across the cylinders.
  11. A

    Overdrive or Regular?

    I have an iron case o.d. for my Dart. Time will tell if I like it or not but I wanted a car I can drive just about any were for a change.
  12. A

    Where to get a black 14inch air cleaner lid?

    I'm pretty sure that my wife wouldnt like me putting parts in the oven. I have cleaned parts in the dish washer before. Amazingly enough, she didnt care at all.
  14. A

    Where to get a black 14inch air cleaner lid?

    I actually got that lid of an old dump truck. It was a cheap chrome one that all the chrome had flaked off. I sprayed it with wrinkle black but I can never get it to wrinkle right.
  15. A

    Where to get a black 14inch air cleaner lid?

    Rob, I had this one on my 70 Cuda. Looked pretty good.
  16. A

    Where to get a black 14inch air cleaner lid?

    Looks good. Does a pie tin fit on it ?
  17. A

    Plumbing

    I used 3/8" aluminum on my Barracuda from the pump to the engine bay.
  18. A

    Plumbing

    You could run a 8an line from the cell in to the fuel pump then 3/8npt out. Actually you should run from the cell, to a filter then the pump.
Back
Top