Search results for query: *

thanks

Hi Do I need to drop the tank to change the sending unit. Its tight with rear right there. Or can I jack up body and left rear and spring drop to get to sending unit?

Hi Any know someone who can rebuilt and replate starter relays

hi Was the stock antenna a telescoping antenna or a fixed antenna Thanks

Hi anyone have a good picture of how this gets installed on 1969 b body

hi just got my car back on road. new b&b clutch. and overcenter spring is installed under dash Shifts great. The clutch pedal doesnt come all the way back up Is there an adjustment?

WILL TRY THANKS

Hi my 69 runner with 383 I have rebuilt stock carb, new distributor with petronix, new coil and carb has fuel The past few drives car felt a little sluggish like no power at times Then the other day I started it drove a few hundred feet and it died Has fuel in carb Dont know what it could...

thanks

it was the rubber line between the tank and steel line. The steel line was pulled up into trunk and the rubber line got kinked

hi i happen to kink the vent line above the tank. the car started and ran for a min and died. I realized the vent line was kinked I fixed the line and tried starting car but it didn't want to start. I did smell fuel in carb so fuel is getting there I opened gas tank cap to let some air in the...

Hi is this the correct oreintation of the sending units. The tank is keyed so it can be installed like this or upside down In this orientation you will see that the vapor tube would be closer to the top of the tank

Hi I resembled the tank and lines for the 440. Got a fuel leak by tank. This is picture of the back of tank. Is this the correct orientation of the vapor line and fuel line? My vapor line is lower then the fuel line. The car runs fine just saw fuel on floor under tank. looks like it may be...

Hi Dash is in and I grounded the switch housing to the the frame under the dash as well

I put in a 3 speed wiper switch which was rebuilt and tested fine. The wiring harness under the dash is new. I just put it in The wiper motors was just rebuilt and i just put it in When I turn it on the wipers they moved a little and stopped Then with the wiper switch in off position I heard...

hi Can someone tell me what type of screw holds the back seat (back vertical seat) to the sheets metal frame between the seat and trunk on a 1969 convertible roadrunner There is a screw per side. Don't know if its a hex head or large Philips. there is also no clip in the frame of car . there...

Thanks That was a detailed explanation

Hi Got my heat to finally work. The fan works in low and medium. If i push the lever to hi it shuts off totally What could this be? Thanks

Hi For 1969 charger. Need to adjust the door strike a little. The door needs to be pulled up a hair to make it close perfectly. Do you adjust the strike/latch? if so how is it done Thanks

ok thanks