Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys,
Picked up what I believe to be a 1970 4-speed, but I don’t know what it came out of, or if it’s possible to identify that.
The photos below is all I’ve taken so far. Just curious if its identifiable by the ID pad.
It shifts thru all gears smoothly and clean inside. My buddy has had...
Guys,
Anyone gotta tips or tricks to getting this starter out?
Im trapped in every direction I go.
Ive unbolted all the studs and from header extension, only bolt left is in front of cylinder 3 and it sprayed coolant everywhere. Should’ve known that was gonna happen.
I only have about a inch...
I have a 7290 yoke that is missing the seal shield off of it. My reason for concern is the new seal from Dr Diff doesn’t fit that tightly around the yoke. So I’m afraid to continue forward with rebuild without some feedback. Seems like that shield has kind of a sleeve on the shaft that might be...
Hey guys, I bought a empty 489 case to rebuild to replace my 741 (2.76).
This is my first ever rebuild of a center section. I bought everything from Cass at Doctor Diff. Sure-grip, 3.55s, the whole kit.
But my problem is I followed a instructional video on YouTube of how to rebuild one. Guy...
I was recently at a fellow Mopar lover’s shop here in Oklahoma who had retired and was selling off all the excess parts he had acquired over many years. He had finished his T5 ‘69 Super Bee and was selling his house, shop, and moving closer to grandkids.
I purchased a couple blocks, some LY...
Hey guys,
Im getting my big block 727 rebuilt. I was having problems with reverse lately and having severe cork gasket leak. I finally changed gasket and new fluid. Reverse has apparently burned up. Wont even try to go back, but 1-3 forwards gears seem good.
So with plans in the future of...
Hey guys,
I’ve got a ‘68 440HP stock motor. Built Jan 22 by 2nd shift. Im planning to swap Cams and maybe some head work if i can find a shop near southern Oklahoma.
I dont know which Heads were used in 1968. Motor runs great, no issues, only add ons to my knowledge was new ignition and...
Afternoon guys!
New guy here doing a little investigating into my latest project. As you can tell by my username what I’m researching.
Here is a picture of my block numbers. I know its a 440hp motor. What does the rest mean?
D440
1 22HP2