Search results for query: *

Since I have had my car (72 charger) on the road the brake light has always been on on the dash. The car has front disc and rear drum brakes. When I was doing my "resto" I sourced a used proportioning valve from Desert valley auto. My brakes all work fine but I'm not sure how to get rid of the...

After finally getting my 8 3/4 installed in my 72 charger I naturally went to bleed the brakes. First I tried to gravity bleed them and after a while I got the fluid to press through and closed up all the bleeders after not seeing any bubbles for quite a while. Took the car out for a spin and...

11x 2.5" drums picture request I need a good picture of 11x2.5" drum brake assembly so I can determine where the bottom self adjuster screw is supposed to go in the correct holes. Thanks!

So here's my mind boggler. I have an 8 3/4 out of a 73 Chrysler imperial car originally had 3" drums. Swapped backing plates to convert them over to 2.5" because they do not make 3" drums to my knowledge. Got everything set up backing plates new shoes drums went to install new drums and the bolt...

I recently got a 8 3/4 to build it was out of a 73 imperial so I changed backing plates from 11 x 3" to 11 X 2.5" not having any drums at all to compare to here is my issue. I ordered new drums from Napa (of course they were special order) got them took em home opened them to paint them and...

Tried to bleed the brakes the other day nothing came through the rear. Fluid comes out fine out of the Front calipers. took of the lines from the M/C fluid comes out fine. Took off the proportioning valve and nothing will come out the fitting where the rear lines attach but comes out fine...

Finally getting to the point of sticking my front suspension together on my 72 charger and when i went to put the cam bolts back in i didn't know if they needed to go a specific way being as from what i can tell they can go so the nut is facing out towards the wheel or in towards the motor and...

Finally got my torsion bars out of my 72 charger and i found out they are only .88 something in diameter so im assuming they are the stock bars that came with the car. The car originally had a 318 in it and when i got it it came with a 383. So the question im getting at do i need to get bars...

I need a little more help on my front suspension for my 72 charger problem because quite frankly i have no clue what im doing when it comes to the front suspension. I was told that i needed to rebuild the front suspension and that there is a kit for it; where can you get these kits at and what...

I recently bought a 72 charger. I have discovered that the passenger side wheel when we try to move it around leans out with the top side of the wheel away from the car (positive camber)but i also think that it also was leaning the opposite way( negative camber) at one point while trying to move...