Search results for query: *

Body and paint complete... Assembly begins, slowly.

I moved the springs in and tubbed the wheel wells to the frame. I have some 15x10’s on some MT 32x16.50 and they fit. I have some 15x14 slots I was going to use with the same size tire. Will I be hitting the frame. The plumbbob shows about an 1-1/2 on one side and 5/8” on the onboard side...

Starting my spring cleaning in the shop and came across a block with the following: 1228 T-41 on the front pad. 2406 R.L. On the side of the block 10 1 62 Just looking to confirm.

I started out with correct steel rims for the 65 Dodge, but I recently switched gears and went with my favorite wheel... Going in to have the jams painted Saturday. Installing a fresh 440/727 and driving the $hit out of this thing!

I’m building 3 cars at once, which is daunting in and of itself. Decisions, decisions, decisions... Disc brakes or drum? 727 or 4 speed? Dana 60 or 8.75? Big Block or ??? I’ve always been told that small blocks are for A-Bodies, big block or small block is acceptable in E-Bodies, Big Block...

im sure this has been discussed in the past but I have yet to find it. I am picking up a 64 Savoy which has spent most its life as a race car. It has a stock width 8.75. New spool, gears and axles. The car has not been tubbed nor have the springs been moved in, yet. This is usually where I...

i know mopars are known for body color in the engine compartment. But has anyone painted theirs black? I’m building a race car and I’ve hit the firewall moving it back 2 inches and I’ve cut part of the inner doghouse. I’m painting the car white and just thinking about painting the engine bay...

Curious if anyone has advice for the 4 dr door panels... Cheaper to get what I have re-worked and recovered or buy new, if anyone sells them, any suggestions? Gonna be a street/strip (wagon) and would like somewhat stock looking panels.

My 64 had a hardboard headliner... Does anyone know if the bows would work in a wagon? The car will have an 8-10 point cage, two bucket seats, no rear seats, door panels, carpet and headliner. Not looking to do any numbers correct car, just a nice clean Super Stock look. Any thoughts, advice...

just finished the engine swap, min tub, narrowed Dana and front disc brake conversion to name a few... Here's a little video just driving it around the drive... I need to adjust the shifter cable and re-bleed the brakes as well as an alignment...

I have been playing around with a 64 Savoy wagon cutting out rusty floors, beating rear fenderwells in and buffing the crap out of this thing... Anyway, I am gonna go the direction of street/strip car and I'm looking to do a roll bar.... But, I'm not sure how to do the roll bar, does anyone on...

I drug this car home, it needs floors, brakes, fuel line and of course motor/trans... Thinking about doing a little street car that will see the track. Spent some time buffing the old paint, gonna keep it the way it is... Just thought I would share. Last pic is from one of my other cars...

I've had this car for about 10 years, finally pulled it out of storage and took into the blaster.... Before and after pics. I need to finish my 65 Coronet 440 before I can put all resources on this, but here is my blank canvas.

Never tried this before... It's a lot of work, so far so good. I installed the sub frame connectors and in the process of cutting down a Dana 60... Not sure about a roll bar yet, I do have a 65 Coronet 330 that will be built as a race car (NSS) in the near future. Just thought I would share.

I sold my Belvedere, now I'm playing with this Dart for a while.... I have trouble cuttin up a B-Body, but have NO problem cuttin an A-Body... It's a 318 4 speed, maybe doing a straight axle, tunnel ram and FW headers in the winter... Hope to have a shop up in a couple of months and then...

It's been a long three years.... After $hitty body work and no oil pressure on a rebuilt motor, this ol girl is ready to hit the road. Repaint and a cheap ol' 400, I need alignment. Should be ready by the weekend!!

I am looking at adding some ladder bars for the 65 Plymouth Bel I... I added a Dana 60 awhile ago. The car will be street driven, but I am going for the look as much as anything. Does anyone make some ladder bars for my app or do I need to make some? HAs anyone made any I can get pics of...

Anyone have any info on swap meets in the Midwest area (KS, OK, MO, NE)?

I've been bummed out over my car since I had some half assed crap body work done by someone I trusted.... To make a long story short, I have hated the site of this car for the last three years!!! After many offers from friends and body shops to paint or primer the car black for $2500 all the...

Car ****!!! Just picked up a four speed to install NEXT winter... Going to keep the 318 for now and just drive this thing!!!