Search results for query: *

All Dodge and Plymouth B body K members from 62 to 65 the same and can be swapped/6 to /6 SB to SB and BB to BB?

I'm looking at a stock '63 Belvedere. I have a 10" wide Centerline with the 4.75 backspace. Probably would like to put a 10"-10.5 slick on that tire. Will it fit or is a spring relocation kit mandatory?

I came across a Dana 60 that was modified for an A body. The '64 rear is 60 7/8" and the Dana is 57 1/8. Never did a spring relocation for a B body. Spring pads of the A body anywhere close to what's needed in the relocated B?

'64 Belvedere with 318. Want to swap 440. Easy swap for the motor? Use same trans K as the 318? THX

I'm looking at a 63 Belvedere SW this week. I don't think the owners knows much about the car. There's no motor in it. Anyway to tell a /6 K from a V8? If it is a 6, does anybody make the /6 to BB swap?

What do I need to know the drum to disc conversion? Factory parts doable? Thanks

What's the biggest tire/slick for '62 Belvedere stock spring location? What's the biggest tire/slick with spring relocation kit? Thanks

I know it was done with the AWB cars. Simple wheelbase change is to get shorter front leaf spring segment. 1" shorter do-able on a '65 Belvedere w/o incurring any body issues or other things?

Anyone have a ED Roth style pic of a 1965 Plymouth Belvedere? Could be a print or a pic of a tee shirt. Thanks

Thought that I came across an article where you could get about a 1" set back with a BB but it only works with SB K member. Any help?

This is what I have-'65 Coronet with fiberglass bumpers and hood. Other than the usual acid dip and aluminum bolts, poly seats and stripping out the interior(its a street driven car) any other way to slim it down? THX

Looking at a '64 Savoy with /6. What do I need to do mounts do I need? Heard the Schumakers conversion mounts move the motor forward. Need the weight transfer, as much as I can get.

Moving from A body to 62-65 B Body. Anyone make the spring relocation kit?

Can't find replacement rear fender skins for my '64 Fury. The car I bought is pretty clean, just the rear fender flares have rusted out. Any help? Thanks

My last B body was a '65 Belvedere street wedge about 35 years ago. I've been play with the A bodies since. I found a '62 Belvedere wagon with 318 poly. Will be making it into a NSSA car with a 440. Are there any funky traits that I need to know? Front suspension, headers, switching over to the...

Anyone making fiberglass hoods, fenders and scoops for a '62 Belvedere? Saw that Sled City had a scoop but I have read some bad press about them.

I am going to look at a '62 Savoy that was originally a 413 now a /6. I need to know what possible K member issues to look for? Are 62-65 B Body the same as the 63-66 A Body, the same K member fits /6's and V8s? What other B Body rear will fit the the'62 body, flange to flange/spring pad to...

Looking to run my '63 in NSS. Rules require that I run a 2X4 intake and Carter carbs. I have a set of Carter Performance carbs rated at 750cfm each. Will a 426 wedge 2X4 intake work? Is the Edelbrock Performer 2X4 a better choice. Were talking a 3800# car, 440, 8" converter, probably a 590...

Just picked up '65 Belvedere with a 6. What to swap a 440. Need to change the K member? Tranny mount? ETC? Thanks

Who makes a well fitting header for the '65? 2" primary tubes with little hassle for the installation. Track only car. Thanks