Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I wanted to put a Hurst Pro-Matic 2 into my factory console.
I had seen this done a few years back online, some guy had done it to his car. I started hunting for that build topic and found it at DodgeCharger forum. The guy who posted it was 'Keepat', he is on here too so HI mate!
There were...
Just arrived today from Great Lakes Mopar. Gregg was super helpful during the purchase, thanks to him a thousand times!
Came in the original box, which still has the shipping note attached to it. :)
Well I finally got myself the correct trunk jack..
Now..If only I knew exactly how to place it in the trunk! Any photos would be helpful. :):eusa_pray:
I know I am missing the 'hold down' spring, But I am going to try and get away with using one I can get at my local hardware store.
Well I purchased a kit with multi color LED's in it.
Pulled my dash, and replaced all the gauge lights with WHITE, the turn signals with GREEN and the Oil and High Beam with RED.
Dash stills dims like before, turn signals etc. look really clear and bright. (I also put in a tach at the...
I am not sure if they ever had them at all? But I'm sick of the 'expensive' metal on metal bouncing sound I hear every time one of my non classic car owning friends or family get in the back and pull the front seatback towards them.
I have been looking at the small 'rest' the seatback settles...
I don't know the car, and have nothing to do with the sale. But stumbled on this searching for stuff for my car.
http://www.ebay.com/itm/Dodge-Coronet-1967-dodge-coronet-383-gorgeous-show-car-turn-key-/191230454593?forcerrptr=true&hash=item2c86392b41&item=191230454593&pt=US_Cars_Trucks
I have seen a few on ebay, but wondered if there was a better option. Unfortunately rechroming is virtually non existent here in Finland, due to regulations. SO sending bumpers abroad and then shipping them back means I might be better of just buying new ones that have already been rechromed.
Is this correct for my body molding on my Coronet 500?
I have this molding on the side of my car.
And on the passenger side at the rear I can see there is a clip missing. At least it is not flush to the body on the bottom edge right at the end of the molding near the bumper.
HI,
I have not been able to find top and bottom radiator hoses for my 383. My car was built Nov. '66. So If possible I would like repro factory hoses that have the correct stamps printed on them etc.
Anyone know where I can get these?
For that matter, I have not found correct ones that...
OK,
I have new seals for the front vent windows on my 2 Door Hardtop. They arrived today with a whole heap of door rubber, etc.
Looked at my original ones, cannot work out how to get the old ones off, and the new ones on. Is there some trick to this? I am cautious because my car has factory...
Hi,
obviously I thought this was going to be an easy change...Wrong!
My local supplier has gotten back to me with these choices.
My 383 is stock in my 67 Coronet. Factory manifold etc. The choices I was given are:
holley 0-4777c
holley 0-6210
holley 0-82651
holley 0-76650HB
holley...
I have a new dash cap coming. My original one has the typical cracks in it from all the sun over the years. Question before I start attacking it. I am assuming that they are just glued in. Right?
I expect the removal to be a mess, I mean it has been sitting there for 47 years! Any tips for an...
HI again..
Seems like I am going through a series of small challenges on this 67 Corrie.
OK..Latest thing.
Has anyone heard of a problem where the tank cannot take the full capacity of fuel? I am assuming (probably my first mistake) that what I am looking at under my 67 is the factory fuel...
HI all,
Got a strange problem. I cannot lock the doors on my new (to me) 67 Coronet. Scenarios:
1- Press the door locks from within the car, door is still able to be opened by someone using the outside door handle. Press the button, door lock pops up and door open.
2- Using key, turn towards...
HI all,
I am new on here. So thought I would kick things off with my new Coronet.
This car is 95% original. Factory 383 4 barrel, 727, 8 3/4 rear (3.23:1), factory POWER windows all around. I think the power window option is pretty rare, at least I have not seen another one yet. Car originally...