• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Mocajava

    What is this braket for!?

    I THINK I know where it goes but no idea what hooks up to it? Any ideas or better yet schematics? Pretty sure it hangs on upper right side of steering column mounting bracket because it fits the holes but no idea what connects to the underside of it unless it is support for vent/ defrost system?
  2. Mocajava

    Pittman arm help....or at least an education

    I started looking for the replacement kit for all of the steering components. I looking at several types of kits from different manufacturers with different components and called and talked to several "tech" people. I assumed the kits would supply a ball joint that replaces the one in the pitman...
  3. Mocajava

    What makes a 383 Magnum different from a standard 383?

    I have a good running 383 2 barrel with a 727 in my '69 Coronet. Tossing back and forth between a 383 Magnum (or maybe a stroked) vs a 440. The gas mileage for a cruiser with some grunt with a 440 scares me and I have a "standard", running 383 right now to build from. I also have a 440 block...
  4. Mocajava

    Anyone tried the CPPA /Toth heads?

    I saw the article in Mopar Muscle (I think?) and read what was beeing touted on these heads and the gents producing them. Sounds like a lot of Mopar experience behind their work but have not heard/ seen anyone mention or a recommendation of their heads in any of the recent head discussions. The...
  5. Mocajava

    440 crank mystery/problems....HELP please!

    Recently purchase a steel 440 crank from a local machine shop that was going out of business. The crank had already been turned and polished .0010 under and was ready to go. I took this with my 440 block to get the boring and honing done to start the fit of pistons and assembly. This is where...
  6. Mocajava

    Bench to bucket swap layour for frame bolts.

    At present I am working on underside of my 69 Coronet. I will probably want buckets in her eventually and wondered if anyone had the bolt layout for buckets seats? I thought I would add reinforcement to the floor and even weld a nut before I did the POR15 treatment to make it an easy bolt in...
  7. Mocajava

    A little help needed with leaf springs...Please?

    My 69 Coronet is sitting with the springs almost flat in her normal stance, even after stripping the interior out of her.The pisture is from the original owner as it appreared in Craig's list here in AK. I am the third owner with almost no miles put on her since 1st owner sold her. Remnants of...
Back
Top