Search results for query: *

The Basics: 440HP, auto xmsn, Carter carb, electric fuel pump 115gph, 14psi (no mechanical pump), Mr. Gasket fuel pressure regulator. The problem: Starts and runs at idle just fine for however long you let it run. Driving on the other hand has issues. First, when accelerating it stumbles...

First the basics; 1971 Dodge 440Magnum HP. Automatic xmsn, Carter AVS #4968S carb. 2951-653 Choke assy. The issue: It does not appear that there is enough room under the carb castings for it (the choke assy) to fit. Is there supposed to be a carb spacer ? If so how tall ? I have the louvers and...

Ok, Lets back up to Labor Day weekend. The car (71 440 charger) is running very nicely. I decided to take it around the property a couple of times. It is still running well, although it almost stalls in gear. Anyway, since this is its first time moving under its own power in probably 10 years, I...

Is it a dry seal or is the best practice to put fuel proof sealer on mating surfaces ?

While I have my tank out waiting for parts, I noticed that there is some very slight little rust spots in the upper portionof the inside. Is there anything that can be done (POR-15 ?) that might address the issue ? It is not bad at all, but since the tank is out I would like to cover the bases...

First one of ya that says Classic Industries is gonna have tragic accident....LOL ! Anyway, l need to get a few items for my 71 440 Charger R/T: 1. The correct fuel sending unit 2. Fuel vapor separator 3. Tank filler neck gasket I have just started looking around. I couldn't find one place...

Would someone be so kind as to post some photos of the throttle linkage and cable for a Carter AVS ? Mine is not hooked up yet, but it looks wrong to me. 1971 440 all stock. Thank you

I am searching for the fast idle rod for my Carter AVS 4968S carb. Does anyone know if the rod is the same as on the Carter AFB or a similar Edelbrock ? I have been searching to the best of my limited knowledge, now it is time to call on the guru's !

Anybody have the vacuum break connector rod and the fast idle rod in their extra parts bin ?

I am in the process of installing a Holley 4160 on my '71 440. So far the accelerator cable is too short. I added some small chain links as a temporary measure (about 1.25 inches). just to have the carb closed. In the current format it only opens about 3/4 throttle. There really is very little...

I just want to do the job once... so a decent intake gasket kit would be beneficial. Anybody have a favorite ?

Being that my car sat in the desert for a couple of years, most, if not all of the vacuum hoses/lines are gone. I need to get busy replacing them soon. If somebody has a good vacuum diagram/ schematic, I would appreciate it. Thanks

I received a 3310 yesterday (used) it appears to have 2 fuel inlets, but on opposite sides. It looks like the same bowl assembly was used at both ends. The only dual fuel lines I see available have both inlets on the same side. WTH