Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was having a "higher than I wanted" fuel pressure using a Carter M6903 mechanical pump on my 440 with two 600 Edelbrocks. It was running at 8 psi and the last oil change I'm getting a strong fuel smell. The oil wasn't over full or thinned out but the fuel smell is telling me fuel is getting...
I have an older manifold that I'm installing 650 Eddies onto. Going with 1" spacers for linkage clearance and heat dissipation.
The spacers have all four holes the same. (secondary diameters)
Should I bore the primary holes in the manifold to match the spacer, or sleeve the spacers to match...
Looking for a phenolic carb spacer that has a "inside" bolt hole pattern. Just looking for a 1/2" thickness for linkage clearance. I'm finding aluminum and wood with this bolt pattern but not phenolic material. Or would aluminum be ok for heat dissipation? Running Eddies.
Bolt pattern like the...
I've been trying to find a cfm chart or info on the Carter AFB carburetor. 1960 thru early 1970's. Most info is vague and it seems like any cfm readings are from someone doing a flow test on just a few models. Any info would be appreciated...