Search results for query: *

The fsm for '70 charger on page2-4, step 3 states to measure from lowest point of one adjusting BLADE to the floor (measurement A). The picture shows a cut-away view of the LCA. I'm not understanding what that is. Secondly, the manual does not mention loosening the bolts to the LCA or jacking up...

Ordered 2 sets of Moog offset bushings K7103 (2 bushings per set) and only received 1 bushing per set. Navigating their website to report the problem was not easy, took almost an hour to figure out the process. Now the good news: 1) They responded via email very quickly to say that the problem...

In the middle of replacing the front-end suspension on a '70 charger. Choose Pro-Forged to order the upper ball joints. When they arrived, I took them out to inspect and test fit them. I had read good reviews about these ball joints, on site here, and also bad reviews about Moog replacements...

rebuilding front suspension on my '70 charger and I'm a 1st timer doing this. Have read countless threads on this, however, can't find a definitive answer on this question. As you see I have pressed out the inner sleeve and the rubber bushing from the lower control arm. The outer sleeve is still...

under normal circumstances, do strut rods need to be replaced when bigger torsion bars are replaced. Do the strut rods wear out like TBs?

I've read thru many of the brake threads and cannot find a definitive answer to this question. I'm in the process of replacing the 3 rubber hoses and fluid. I opened the rear bleed screws to drain those hard lines and then the rear rubber hose. My question is: Shouldn't the forward section of...

Learned a new word yesterday. Learned it here reading thru the drum brake threads. The word is "swage", and for about an hour yesterday I was being "swaged" and didn't even know it. If you don't know the meaning of the word, my definition is: Being tricked into thinking that the right front drum...