• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1963 Polara Bracket Identification

Willaz

Member
Local time
10:22 AM
Joined
May 25, 2021
Messages
5
Reaction score
16
Location
Prescott Arizona
Hello all,

Looking for help identifying parts that have been removed from my v8/auto 63 Polara by the PO. These brackets appear to be mounts for engine accessories or drivetrain linkage. Either removed from the car, it's original 361/727, or collected for the 440/4sp swap.

Any suggestions will be appreciated.
16220752070724824833341649666707.jpg
16220752465591906185938806317189.jpg
 
I believe the largest one may bolt between the K member and the bottom of the radiator support. Long one is alternator adjusting bracket. No clue on other two..
 
#2 should be an alternator bracket that is bolted to the front of the pass head
 
The so far unidentified bracket looks like a plug wire holder with the plastic insulator missing.
Mike
 
Auto Transport Service
Back
Top