1967 Belvedere Fender tag help

[PopsRacer]

I just got this Belvedere and am trying to figure out the fender tag, i have a lot of it but it is conflicting rear ends (3.55 and 3.23) , Also says rear window defogger?? There is none and it seems to be the factory rear window. Any help would be great

 

[copper67sat]

Here's what I got from an online decoder

CAR: Plymouth Belvedere 2 Door Hardtop
ENGINE: 318cid 2-bbl V8
TRANSMISSION: 3-Speed Automatic
TIRES: 7.75 x 14 WSW
MODEL YEAR: 1967
BUILD DATE: April 06.
AXLE: 2.94 Rear Axle Ratio
INTERIOR: High Trim Grade, Vinyl Split Bench Seats. Gray Interior.
PAINT: Light Blue Metallic (Dodge, Plymouth), Crystal Blue Metallic (Chrysler), Wedgewood Blue Metallic (Imperial).
OTHER: Black (Dodge, Plymouth), Formal Black (Chrysler, Imperial) Upper Door Frame Color. Black Horizontal Accent Stripe.

MOLDINGS:

ABC OPTIONS:
A1: 26in Radiator
R1: AM Radio
S1: Air Conditioning
X1: Tinted Glass (all)
Y5: Vinyl Top, Unknown Color

abc OPTIONS:
j4: Moulding - Body Sill Narrow
m9: Unknown Option

 

[R413]

It has the silver special interior.

m9 body side mouldings delete

Belvedere II had those high mounted body mouldings standard, but there are a small percentage that never had them. And then the did have the GTX rocker mouldings, which most Belvedere II cars never got. Most of these with the swapped mouldings are silver specials.

 

[YY1]

Interesting.

I have a 4 door parts car that is high side molding delete...and silver special interior.

Never noticed the rocker moldings, but now I'll have to check.

 

[copper67sat]

I have the broadcast sheet from a 67 Belv II 4-dr that was an extra in one of my cars. Has the H4A interior code and is stamped SILVER SPL at the bottom. Box 649 - Delete Molding has a 9 in it so I am guessing this corresponds to m9 on the fender tag. Never really looked at that before.

 

[YY1]

I found a remnant of the BS in that parts car.

Just a few inches of the bottom, with that same SILVER SPL on it.