Max440
Well-Known Member
I have a 1967 satellite. For some reason I really like this car otherwise I would find something else to do as body panels are close to impossible to get. Does anyone make front fender lower patch panels? Secondly does anyone make a trunk extension. This piece becomes bart of the inner fender for the quarter panel. Is there a repo trunk extension for another B Body that I can cut the center and use it "? Thats all I really need.
Next - disc brake conversion - lots of kits out there which are best? I would like to add power brakes too. As far as suspension goes lots of options. so who has the best for handeling and ride for a reasonable price? Are new upper a frames for improved caster worth the money? What brand is the best value? I really would liek a 4 link in the back and a new clip up front but thats well out of my budget on this car. So just trying to figure all of this out to be sure I get the right stuff the first time.
Also I will have a healthy 440 in this car. So sub frame connectors and torque boxes. Again lots of options here too just which one installs easily or better than others ?
As another comment on the left side quarter I used a Sherman panel - They are junk and are not correct. It took me huge hours to get these to work and ended up reworking the wheel arch as it is incorrect as well. Your stock wheel trim has a different aach. So on rt side I am using a AMD and forming the rest of the arch with dies and an english wheel - even more work LOL. Any information would be greatly appreciated.
Next - disc brake conversion - lots of kits out there which are best? I would like to add power brakes too. As far as suspension goes lots of options. so who has the best for handeling and ride for a reasonable price? Are new upper a frames for improved caster worth the money? What brand is the best value? I really would liek a 4 link in the back and a new clip up front but thats well out of my budget on this car. So just trying to figure all of this out to be sure I get the right stuff the first time.
Also I will have a healthy 440 in this car. So sub frame connectors and torque boxes. Again lots of options here too just which one installs easily or better than others ?
As another comment on the left side quarter I used a Sherman panel - They are junk and are not correct. It took me huge hours to get these to work and ended up reworking the wheel arch as it is incorrect as well. Your stock wheel trim has a different aach. So on rt side I am using a AMD and forming the rest of the arch with dies and an english wheel - even more work LOL. Any information would be greatly appreciated.