FOR SALE 1968 coronet 440 sedan

[68-500]

Parting out very solid car Im keeping hood, deck lid, tail panel, ac-heater box, dash harness, rear bumper, fenders, floors.
Would trade blue interior seats, seat belts, arm rests for black pieces that would fit a hardtop.
Selling most everything else trim, frame rails, torsion support, doors, glass, 26 inch radiator support, fender aprons, K-frame, 8-3/4 housing, lots of other good stuff.
Id like to price all this stuff butt its hard to gauge. Tell me what a fair price is and well make a deal. Not looking to make a fortune just recoupe a little money and not scrap good parts. Be patient guys i can only work on it on weekends and ship the following weekend. Car is in NE Oklahoma

 

[Darter6]

I'm waiting to hear from a guy about some parts that I asked him about.
If he doesn't come thru I am looking for small block crank and water pump pulleys for A/C and power steering.
I have a 70 318 but I think a 68 small block power steering pump brackets are the same.Need those too.

 

[68-500]

Shoot. I just looked I don’t have the crank or water pump pulley. Engine is kind of basket case in the trunk. Sorry

 

[davek]

pics of under battery tray,looking for fender apron

 

[68-500]

Dave’s I’ll get pic tomorrow. I believe it good the battery tray is.

 

[68-500]

Fender apron pics inside wheel well, above battery tray, under tray. Looks real good to me only very light surface rust.

 

[RS Mopars]

H

Parting out very solid car Im keeping hood, deck lid, tail panel, ac-heater box, dash harness, rear bumper, fenders, floors.
Would trade blue interior seats, seat belts, arm rests for black pieces that would fit a hardtop.
Selling most everything else trim, frame rails, torsion support, doors, glass, 26 inch radiator support, fender aprons, K-frame, 8-3/4 housing, lots of other good stuff.
Id like to price all this stuff butt its hard to gauge. Tell me what a fair price is and well make a deal. Not looking to make a fortune just recoupe a little money and not scrap good parts. Be patient guys i can only work on it on weekends and ship the following weekend. Car is in NE Oklahoma

View attachment 1267328 View attachment 1267329 View attachment 1267330 View attachment 1267331 View attachment 1267332 View attachment 1267333 View attachment 1267334 View attachment 1267335 View attachment 1267336 View attachment 1267337

Hi I am in need of the passenger side splash shield for the front fenders the piece that goes behind the tire that keeps debris from getting into the door hinge area for my 69charger I do believe the 68 threw 70 cornet will work but not sure if a two door a 4 foot makes a difference

 

[Craig]

Hi,
I would be interested in the hood latch assembly, and the brake pedal assembly with all of the brackets, and the parking brake assembly.
Fenders, if you wanted to sell those too, or trade for really nice pair of 69 fenders.
Thanks,
Craig

 

[68-500]

RS Mopars, ill look and see if its there, I didn’t see 1 on driver’s side.
Craig I have a hood latch. I need to keep parking brake pieces for my car. I dont know if Im selling fenders yet, as soon as i do I’ll need them. Previous owner took most of the non-power brake parts.

 

[68-500]

This isn’t starting out very well no splash shield either side. The hood latch is not B-body or even mopar. Sorry guys.

 

[RS Mopars]

RS Mopars, ill look and see if its there, I didn’t see 1 on driver’s side.
Craig I have a hood latch. I need to keep parking brake pieces for my car. I dont know if Im selling fenders yet, as soon as i do I’ll need them. Previous owner took most of the non-power brake parts.

Thanks let me know if you have one I don't need the drivers side but need the passenger side

 

[erikcroissant]

I’m looking for:
1 castle nut for the lower ball joint
1 strut rod nut- I need the smaller one that faces the front of the car
4 screws that mount the steering column to the firewall, these screw in from under the dash
Let me know what you can find

 

[68-500]

RS no splash shiel on passenger side sorry.
Erik ill look should be able to do the castle nut and strut rod. No bolts for the column. Ill know for sure tomorrow

 

[erikcroissant]

RS no splash shiel on passenger side sorry.
Erik ill look should be able to do the castle nut and strut rod. No bolts for the column. Ill know for sure tomorrow

Sounds good thanks for your time

 

[QQ1 68 GTX]

How nice is the lower blue dash pad? Price?

 

[derush]

how are the sill plates? thanks ed

 

[furious70]

How about this piece?

 

[68-500]

B5 RR I sent you a pm. Derush ill look them over tonight. Furious70 I need that splash shield for my car sorry.

 

[RemCharger]

This isn’t starting out very well no splash shield either side. The hood latch is not B-body or even mopar. Sorry guys.

View attachment 1268385

Looks like might be a 66 67 dodge b body

 

[68-500]

B5 RR heres to only problem i see with lower dash.