Butch Glancy
Active Member
I have a 100% survivor body, engine and transmission. Unfortunately I fubared the hood.
The body is really great with only one bad spot behind the rear windshield on the driver side. The interior is solid but has been redone in an ugly velour.
This engine is rebuilt (supposedly and I have no reason to doubt it) and I just had the transmission rebuilt. I put a billet higher capacity pan on the tranny, so I'm already not going to be 100% OEM/original.
I'm going to go with electric fans, after market radiator and at least an electric fuel pump.
I need bolts, transmission lines, brake lines, front and rear wheel bearings, etc. Probably at least an under the hood wiring harness. Carburetor kit, master cyl and wheel cyl and caliper kits.
I intend to start with wheel bearings and brake lines. and go bottom up.
Any advice on hustling parts?
The body is really great with only one bad spot behind the rear windshield on the driver side. The interior is solid but has been redone in an ugly velour.
This engine is rebuilt (supposedly and I have no reason to doubt it) and I just had the transmission rebuilt. I put a billet higher capacity pan on the tranny, so I'm already not going to be 100% OEM/original.
I'm going to go with electric fans, after market radiator and at least an electric fuel pump.
I need bolts, transmission lines, brake lines, front and rear wheel bearings, etc. Probably at least an under the hood wiring harness. Carburetor kit, master cyl and wheel cyl and caliper kits.
I intend to start with wheel bearings and brake lines. and go bottom up.
Any advice on hustling parts?