• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1969 road runner trunk wiring

Kmart

Well-Known Member
Local time
12:30 PM
Joined
Aug 6, 2021
Messages
52
Reaction score
7
Location
Batesville, AR
Can someone send me a pick on where the licence plate wiring goes through the trunck to the outside. Mine was all rusted out and is going to get a patch. Need to see location and rubber grommet size. Thanks
 
Dodge..but imagine it's pretty similar.. small hole beside the wiring clip. Mind you Plymouth has the full trunk tail panel, so you may want to wait for a Plymouth picture.
beerestoration2018 322.JPG
 
your yellow Superbird would be the same Dad.
 
your yellow Superbird would be the same Dad.
Yep, well aware but it's not in the shop nor do I have 20,000 pictures of it like I do of the Bee. Also 70 Plymouth is a normal trunk lid, '69 the lid is the tail panel for the most part.
 
my '69 road runner had the wire hole in the same spot as your Bee.
 
hope this helps these are from my 69 road runner

B863AE43-AF78-43C2-8F6C-C004949B98ED.jpeg


FC0C4E11-1EE6-44E8-80E7-3B6D6868FB55.jpeg
 
Thank u that helps alot . Somebody before me had tried to represent rust in that area and there was no hole. That gives me a location for that hole. Thank you .
 
Auto Transport Service
Back
Top