SpartanGarage
Well-Known Member
- Local time
- 2:39 AM
- Joined
- Nov 6, 2020
- Messages
- 212
- Reaction score
- 530
- Location
- East Syracuse New York
More pictures.
**1970 Dodge Charger STUDENT build!!! matching numbers! (teacher posting)**
- Thread starter SpartanGarage
- Start date
furious70
Well-Known Member
That's not 1970 high back bucket stuff?
I wish I would have seen the tires earlier to implore you to go 295/45/18 nitto 555's. Get some sidewall on that thing.
I wish I would have seen the tires earlier to implore you to go 295/45/18 nitto 555's. Get some sidewall on that thing.
Coelacanth
Well-Known Member
- Local time
- 12:39 AM
- Joined
- May 10, 2024
- Messages
- 2,191
- Reaction score
- 3,718
- Location
- Edmonton, Alberta, Canada
45 series tires isn't nearly enough sidewall, to my eyes.
I'll probably be burned at the stake for heresy, but I would go with Recaro seats instead of what you have shown.
A style like this:
Coelacanth
Well-Known Member
- Local time
- 12:39 AM
- Joined
- May 10, 2024
- Messages
- 2,191
- Reaction score
- 3,718
- Location
- Edmonton, Alberta, Canada
Good advice. If purity isn't of prime importance, adding some aftermarket buckets is a big improvement. Side bolsters, better lumbar support, and much lower cost make it a worthwhile suggestion, especially if you're going to be doing donuts and taking corners without your butt sliding off the seat. I used my original seat tracks & brackets and fabricated my own adapter plates to mount these SCAT by ProCar Sportsman series seats in my Charger, and they were less than $300 (USD before conversion to CAD) each. ProCar makes some nicer all-black vinyl versions but they were about $200 CAD more, each...so these did the business for me.
The estimates I got to reupholster my existing buckets was 3 or 4 times higher than buying these.
furious70
Well-Known Member
295/45/18 is 28.4" tall I think, it's all the sidewall you're gonna get without modifications to the wheel wells.
Coelacanth
Well-Known Member
- Local time
- 12:39 AM
- Joined
- May 10, 2024
- Messages
- 2,191
- Reaction score
- 3,718
- Location
- Edmonton, Alberta, Canada
I agree but I think you missed my point. 45 series rubber isn't to my taste. 60 series looks much better, wheel well mods notwithstanding.
- Local time
- 11:39 PM
- Joined
- Apr 13, 2012
- Messages
- 41,747
- Reaction score
- 152,231
- Location
- Granite Bay CA
I had that size on the red Charger. I thought the sidewalls were taller than I wanted.
Looking back, they look pretty good. Better than I remembered. Maybe I’ll buy them in that size when I replace what I have. Mine never measured then 28.4 number. I came up with 27 3/4 as measured with the car in the air.
Derwud
Well-Known Member
Contact Scat/Procar to see if they will donate or sell you a set of seats for the car.. Much better than stock..
Only go with 15 inch wheels if you like junk tires..
Only go with 15 inch wheels if you like junk tires..
SpartanGarage
Well-Known Member
- Local time
- 2:39 AM
- Joined
- Nov 6, 2020
- Messages
- 212
- Reaction score
- 530
- Location
- East Syracuse New York
Do you happen to have a contact? I'll reach out soon.
Some Car Guy
Well-Known Member
Aftermarket seats would be better than wrong year stuff. If you can’t score some high backs, go aftermarket. Mopar guys get all twitchy when wrong year parts, wheels, and paint show up. Just the way we are.
Derwud
Well-Known Member
https://procarbyscat.com/?srsltid=AfmBOop-m42A5utaW8YAfZXYccd5Rzn1NmCHS9SE-4wAilQ2FIOVce2A
They some times have seconds or returns (I got 4 seats from them and mounts)
Although I don't disagree with what has been said about seats, I don't think seat types/years will impact raffle ticket sales. The majority of the raffle ticket sales will not be to the Mopar community.
SpartanGarage
Well-Known Member
- Local time
- 2:39 AM
- Joined
- Nov 6, 2020
- Messages
- 212
- Reaction score
- 530
- Location
- East Syracuse New York
The flu is taking everyone out!
SpartanGarage
Well-Known Member
- Local time
- 2:39 AM
- Joined
- Nov 6, 2020
- Messages
- 212
- Reaction score
- 530
- Location
- East Syracuse New York
the engine . I’m sure going to be roasted for it
furious70
Well-Known Member
My brother has the 295/40/18 nt555 on his 70 charger and to me the 45 series is a big improvement on looks
Yep, you're right...the lifter valley and front face aren't coated with red glyptal. What kind of outfit are you running there anyway???
I'M TOTALLY KIDDING YOU!!!
________________________________
Ok, you have a nice small block LA. sporting a double roller timing chain.
What are the bore and stroke?
Cylinder heads are stock or ?
Camshaft specs?
Windage tray?
Induction (carb or EFI)?
Exhaust (headers or stock manifolds)?
Other goodies?
Looking good!
chargervert
Well-Known Member
It's not too late to paint it black and put a Super Charged Hemi in it!
The orange paint though...Yep, you're right...the lifter valley and front face aren't coated with red glyptal. What kind of outfit are you running there anyway???
I'M TOTALLY KIDDING YOU!!!
________________________________
Ok, you have a nice small block LA. sporting a double roller timing chain.
What are the bore and stroke?
Cylinder heads are stock or ?
Camshaft specs?
Windage tray?
Induction (carb or EFI)?
Exhaust (headers or stock manifolds)?
Other goodies?
Looking good!
Similar threads
For Sale: Not Mine
1969 Dodge Charger 500 on ebay; VIN: XX29L9B214385
