FOR SALE 1971 Charger 500 parting out - everything

[cdkmbjones]

Yes but I'm keeping it for my car

 

[cdkmbjones]

Im comparing the pictures to mine. Thanks for the effort. I will let you know. Is the inside hood release cable intact and functional?

Also - the radiator is 26" and the condenser is matched to it. It should be the same for big or small block - the lines may or may not be different

 

[B5bird]

Also - the radiator is 26" and the condenser is matched to it. It should be the same for big or small block - the lines may or may not be different

Can you see in the bottom of the picture where the lower line comes up and turns toward the passenger side of the condenser? This style of condenser has both lines on the drivers side, one at the top and one at the bottom.

 

[cdkmbjones]

Can you see in the bottom of the picture where the lower line comes up and turns toward the passenger side of the condenser? This style of condenser has both lines on the drivers side, one at the top and one at the bottom.
View attachment 502221

So it won't work for you?

 

[B5bird]

I can't tell by your pictures. Do both lines mount on the drivers side?

 

[lagtone420]

I have a 1971 Charger 500 that I picked up to assist me with some parts that I needed for my 1971 Super Bee restoration. The car is very complete and came with:
Hideaway headlights - straight front bumper and minimal pitting on the hard to find 71 grilles
Rally gauges
Bucket seats with separate buddy seat/arm rest.
Charger 500 chrome trim
Glass
Straight rear bumper
Decent 1971 rear tail lights - one is very nice, the other has some crack - all lenses good
Interior plastic parts and soft parts
318-2 barrel engine- was running when I started taking parts off it. The entire drivetrain from the 26" radiator to the rear axle is complete. I took both front fenders off the car, but have another set of 71 front fenders with rust at the bottoms, and a clean set of 1972 front fenders.
Please contact me with any specific parts you might be looking for - like I said, aside from the headliner and rug this was a fairly complete car.
I plan on cutting the floor out from under the rear seat since they don't remake that section, and will cut off any parts you may need like the clean roof, or frame rails, etc.. I am located on Long Island in NY so plan on coming if you need one of the larger items that can not be shipped.
* side note - I haven't cut anything yet - but will soon, if someone wants the entire car make me an offer - I might be willing to sell it whole.
Chris

View attachment 436968 View attachment 436969 View attachment 436970 View attachment 436971 View attachment 436972

 

[lagtone420]

I have a 1971 Charger 500 that I picked up to assist me with some parts that I needed for my 1971 Super Bee restoration. The car is very complete and came with:
Hideaway headlights - straight front bumper and minimal pitting on the hard to find 71 grilles
Rally gauges
Bucket seats with separate buddy seat/arm rest.
Charger 500 chrome trim
Glass
Straight rear bumper
Decent 1971 rear tail lights - one is very nice, the other has some crack - all lenses good
Interior plastic parts and soft parts
318-2 barrel engine- was running when I started taking parts off it. The entire drivetrain from the 26" radiator to the rear axle is complete. I took both front fenders off the car, but have another set of 71 front fenders with rust at the bottoms, and a clean set of 1972 front fenders.
Please contact me with any specific parts you might be looking for - like I said, aside from the headliner and rug this was a fairly complete car.
I plan on cutting the floor out from under the rear seat since they don't remake that section, and will cut off any parts you may need like the clean roof, or frame rails, etc.. I am located on Long Island in NY so plan on coming if you need one of the larger items that can not be shipped.
* side note - I haven't cut anything yet - but will soon, if someone wants the entire car make me an offer - I might be willing to sell it whole.
Chris

I need the tail light housing L&R

 

[cdkmbjones]

I can't tell by your pictures. Do both lines mount on the drivers side?

No - the low pressure return with the accumulator is on the pass side and the high press with the muffler coming out of the compressor is on the drivers side

 

[cdkmbjones]

UPDATE - Hideaway Headlight assembly - SOLD

 

[cdkmbjones]

have a 1971 Charger 500 that I picked up to assist me with some parts that I needed for my 1971 Super Bee restoration. The car is very complete and came with:
Hideaway headlights - straight front bumper and minimal pitting on the hard to find 71 grilles
Rally gauges
Bucket seats with separate buddy seat/arm rest.
Charger 500 chrome trim
Glass
Straight rear bumper
Decent 1971 rear tail lights - one is very nice, the other has some crack - all lenses good
Interior plastic parts and soft parts
318-2 barrel engine- was running when I started taking parts off it. The entire drivetrain from the 26" radiator to the rear axle is complete. I took both front fenders off the car, but have another set of 71 front fenders with rust at the bottoms, and a clean set of 1972 front fenders.
Please contact me with any specific parts you might be looking for - like I said, aside from the headliner and rug this was a fairly complete car.
I plan on cutting the floor out from under the rear seat since they don't remake that section, and will cut off any parts you may need like the clean roof, or frame rails, etc.. I am located on Long Island in NY so plan on coming if you need one of the larger items that can not be shipped.
* side note - I haven't cut anything yet - but will soon, if someone wants the entire car make me an offer - I might be willing to sell it whole.
Chris

 

[Garys8]

Do you have a power steering coupler from the column to the steering gearbox?

 

[cdkmbjones]

Sorry it's gone

 

[Garys8]

Ok, thanks anyway!

 

[rs1]

Is This a power brake car?

 

[cdkmbjones]

No its manual drum

 

[cdkmbjones]

**UPDATE:
Many removable parts have been sold from the car so at this point I am entertaining offers to take the whole car.
What it does still have:
A great solid shell for someone needing a roof, cowl, firewall, and the majority of the rear sheetmetal.
Both doors
Hood
All of the A/C parts are in tact
The 318 and automatic were running when I bought the car and are complete
Suspension parts
Misc small items
Make me an offer.

keywords: mopar, plymouth, dodge, six pack, charger, roadrunner, b-body, b body, e-body, e body, super bee, superbee, r/t, rt, 1972,71

 

[opschief3537]

Are the doors still available?

 

[cdkmbjones]

Yes - drivers side looks clean, pass side has some body filler but looks like not for rust but rather dents. It's mid way up the door and to the door edge. They are in primer and the guy I bought the car from was "restoring it"

 

[opschief3537]

Would you be able to send some pics?

 

[moparchris]

Do you still have the front passenger shoulder harness belts? They bolt to the inner roof structure.
Thanks