1972 Plmouth Satellite Sebring inner and outer replacement rocker panels

[72gtxwannabe]

Hey everyone, looking to repair rusted rockers on my 1972 Satellite. I am replacing floor pan, torsion bar cross member, and inner rockers are rusty and thin. Outer rockers are held together with bondo and paint. Does anyone sell inner replacement panels? I have read that this B body shares the same front structure, engine box, cowl , and front floor pan as the Cuda, if so will the Cuda inner rockers work? Seems to be more aftermarket support for the1970-74 Cuda. Or will I be stuck fabricating my own? I want to make this car structurally sound before any other body repairs. Any advice and insight will be helpful and appreciated.

 

[moparmarks]

Rockers are different between B and E as is the top cowl plate. They share the same front frames, aprons, T/B cross member, core support, front floor pan and A/C fire wall.
I probably have some 72 B full rockers. I'll check

 

[72gtxwannabe]

Thank you for taking time to look, and the clarification of the parts that interchange between B and E bodies.

 

[moparmarks]

Looks like I just have pass side rockers right now.
PM me if interested.
thanks

 

[72gtxwannabe]

pm sent