383 motor in the runner.

[blue69runner]

Had a hell of a time putting the bolt's in the K member on the motor mount's. My new oil pan was hitting the cross link under their and could not get the motor to drop down enough. But after a lot of giggle and wiggle. And cussing finely got them in. Just an old 383 but should make around 400 hp. as stated before.

 

[Don Frelier]

Keep an eye on that thermostat water outlet.
We haven't had any luck with those chrome aftermarket style.
Keep us posted...

 

[moparmarks]

What pan did you use?

 

[ruffcut]

Those mounts can be tricky! I'm seeing progress! RUFFCUT

 

[blue69runner]

What pan did you use?

5 quart after market. Putting trans. in today and will see once the cross member is in.

 

[blue69runner]

All around a good day for sure. Just to get the motor in is a reward. Makes me think it all has been worth the effort to restore this old runner. Thanks for all the comment's and a grate group of guy's. Nice to have a go to group to bounce ideas off of. At least I am not a lone and have a pool of knowledge to pull from.