426 Hemi

[BruteForce1.]

Found a 426 Hemi Engine trying to see if I can find out what vehicle it came out of casting #2468330

 

[pnora]

Found a 426 Hemi Engine trying to see if I can find out what vehicle it came out of casting #2468330

Need more info than that. Casting date, stampings, possible VIN.

 

[BruteForce1.]

No Vin car is long gone, can’t see the stamp on block I’ll see if seller can clean tag on block for better pics

 

[Jerry Hall]

66-67 had no vin stamp. Cast date should be on the opposite side of the block from the casting number. If it's got a vin number, it will be on the pad on passenger side lower edge of the block. The pad on the top of the block to the drivers side of where the intake sits will have additional information, as in year and build date, etc.

 

[Outlaw525]

Also, '68 engines had the VIN stamped on the upper driver's side of the bellhousing lip.

 

[BruteForce1.]

Here are the numbers found on the block, can someone decode this so I l know what car it came out of, Thanks

 

[AR67GTX]

I remember the first letters are the engine plant designation. I thought it said VIN but it’s MN or MV which is the Marysville engine plant.

Here are threads from researching mine. You may need someone who is good with the 1,000 day calendars to figure it all out.

VIN stamp on 10-31-66 Hemi casting
https://board.moparts.org/ubbthread...cs/1109594/426-hemi-block-stampings-help.html

 

[pnora]

Here are the numbers found on the block, can someone decode this so I l know what car it came out of, Thanks

View attachment 1943462

View attachment 1943463

Day 2700 is Wednesday, December 18, 1968, So if it was a production line install it would be for a 1969 car. Any numbers on the pan rail or the bell area by the oil sender?