I found new sets for my 71 GTX on Ebay. They dont press in like the originals, but have the square shape at the base of the bolt to fit in the track. I had to use a little epoxy weld to simply hold them in place so I could put my seats in.Anybody have a source for the hardened studs that go on the bottom of our seat tracks?
r/t specialties they use to have them check with them.I found new sets for my 71 GTX on Ebay. They dont press in like the originals, but have the square shape at the base of the bolt to fit in the track. I had to use a little epoxy weld to simply hold them in place so I could put my seats in.
Do you happen to have the link to those? I can't seem to find anything close on ebay.I found new sets for my 71 GTX on Ebay. They dont press in like the originals, but have the square shape at the base of the bolt to fit in the track. I had to use a little epoxy weld to simply hold them in place so I could put my seats in.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/361860405516I see Mega Parts sells 4 studs and 4 nuts in a kit for $30., but I really only need 1 stud.
You could use carriage bolts. Just flatten the side facing the frame.