ereed
Member
Contact seller
The motor is based on an early Mopar 400 CI Wedge low deck block with aftermarket steel caps and a 4340 stroker crank and Mopar performance aluminum heads.
Mopar Performance Forged Crankshaft 4340 Steel
Mopar Performance Full Roller Valve Train
Mopar Performance Stage VI Aluminum Heads
The motor comes complete with water pump, alternator, AC compressor, power steering, all the drive accessories and pulleys. It does not have the fast ECU injectors, throttle body, or Supercharger.
This motor was built by Nelson Racing Engines of Chatsworth, CA for "Hammer", the famous 1970 Roadrunner seen in the movie Fast and Furious Tokyo Drift. Car built by Steve Strope.
Here are some links of it on the dyno making 750HP (with the Supercharger)
http://www.nelsonracingengines.com/videos/on-the-dyno/NRE-Blown-500cid-Mopar.html
And another running in the car:
http://www.nelsonracingengines.com/videos/test-drive/1970-PureVision-NRE.html
The motor was only in the car for about 1000 miles before being replaced with a Hemi.
I'm not sure what the market value is for something like this. Maybe you guys will chime in and help me figure that out. It's a great motor that cost thousands to build. I'm just looking to get it in the hands of someone that will use it. It's been sitting in Steve Strope's shop since we put the Hemi in Hammer.
I have it listed on Craigslist and Ebay for $4000. I'm open to offers and I won't be offended, so don't hesitate to throw out an offer.
Thanks all.
Eric
Mopar Performance Forged Crankshaft 4340 Steel
Mopar Performance Full Roller Valve Train
Mopar Performance Stage VI Aluminum Heads
The motor comes complete with water pump, alternator, AC compressor, power steering, all the drive accessories and pulleys. It does not have the fast ECU injectors, throttle body, or Supercharger.
This motor was built by Nelson Racing Engines of Chatsworth, CA for "Hammer", the famous 1970 Roadrunner seen in the movie Fast and Furious Tokyo Drift. Car built by Steve Strope.
Here are some links of it on the dyno making 750HP (with the Supercharger)
http://www.nelsonracingengines.com/videos/on-the-dyno/NRE-Blown-500cid-Mopar.html
And another running in the car:
http://www.nelsonracingengines.com/videos/test-drive/1970-PureVision-NRE.html
The motor was only in the car for about 1000 miles before being replaced with a Hemi.
I'm not sure what the market value is for something like this. Maybe you guys will chime in and help me figure that out. It's a great motor that cost thousands to build. I'm just looking to get it in the hands of someone that will use it. It's been sitting in Steve Strope's shop since we put the Hemi in Hammer.
I have it listed on Craigslist and Ebay for $4000. I'm open to offers and I won't be offended, so don't hesitate to throw out an offer.
Thanks all.
Eric
Attachments
Last edited: