FOUND 66-69 disc brake hub

[dan juhasz]

For a 67 GTX with factory disc brakes I have one hub that the inner bearing race is loose. I need a used good replacement. If anyone has one please give me a shout.
Thanks Dan

 

[gford]

For a 67 GTX with factory disc brakes I have one hub that the inner bearing race is loose. I need a used good replacement. If anyone has one please give me a shout.
Thanks Dan

I have one $125 plus ride

 

[dan juhasz]

I have one $125 plus ride

I have one $125 plus ride

Your mail box is full
Could you send me some photos
732 599 8774
Thanks

 

[gford]

Your mail box is full
Could you send me some photos
732 599 8774
Thanks

will do

 

[droptop2bottom]

I have one off a 67 R/T.

 

[dan juhasz]

I have one off a 67 R/T.

Sent you a pm

 

[dan juhasz]

will do

Any update?

 

[droptop2bottom]

Pics

 

[dan juhasz]

Could you do me a favor and measure through the center of hub to a level surface mine is around 5 1/16. Also could you show me a side view does it look like mine.?

 

[droptop2bottom]

Both mine are just under 5". From the top of the disc to where the studs mount is 2 1/2" and from there to the top or the hole is 1 5/8"

 

[droptop2bottom]

Side view

 

[dan juhasz]

They have to be right
Here is my address when you get the total I can PayPal the funds right away
Dan Juhasz
2000 Hilltop Rd
Whiting NJ 08759-1314
Appreciate it big time

 

[droptop2bottom]

I brought out 2 more that I still have to take apart. They measure the same.

 

[dan juhasz]

Are you sure the first set were from a 67 RT? The set in that last photo seem like 70 and up calipers. My calipers are the 4 piston bendix calipers. Do you remember what calipers were on the first set?

 

[dan juhasz]

Set another picture to pm, better view of hub and dimension there. The two measurements you gave me of 1 5/8 and 2 1/2 check out.

 

[droptop2bottom]

Has the oil seal on it 2 3/8"