72 73 74 ebody caliper differences..

[RemCharger]

I'm dealing with a 73 cuda, which has the pin type calipers. Would the 74 slider calipers and brackets bolt on to these spindles?
TIA

 

[R/T Boy 67]

Slider type calipers with the proper brackets will fit your knuckles.

 

[gkent]

There are two different caliper brackets for the sliders. One for 10.87" rotors and one for 11.75" rotors. Both will fit your knuckles - just make sure you get the ones to fit your rotors. The one's for the 11.75" rotors are reprodcued and available from Dr Diff - often for less $$ than someone wants for used junk.

You can easily tell the difference looking at them ... Open this article and scroll down

DISC-O-TECH: Stop on a dime from Mopar Action and Rick Ehrenberg

DISC-O-TECH: Stop on a dime from Mopar Action and Rick Ehrenberg

www.allpar.com

 

[RemCharger]

Thank you Sir's, that's what I figured but best to verify. These are small rotors.