72 73 74 ebody caliper differences..

[RemCharger]

I'm dealing with a 73 cuda, which has the pin type calipers. Would the 74 slider calipers and brackets bolt on to these spindles?
TIA

 

[R/T Boy 67]

Slider type calipers with the proper brackets will fit your knuckles.

 

[gkent]

There are two different caliper brackets for the sliders. One for 10.87" rotors and one for 11.75" rotors. Both will fit your knuckles - just make sure you get the ones to fit your rotors. The one's for the 11.75" rotors are reprodcued and available from Dr Diff - often for less $$ than someone wants for used junk.

You can easily tell the difference looking at them ... Open this article and scroll down

DISC-O-TECH: Stop on a dime from Mopar Action and Rick Ehrenberg

DISC-O-TECH: Stop on a dime from Mopar Action and Rick Ehrenberg

www.allpar.com

 

[RemCharger]

Thank you Sir's, that's what I figured but best to verify. These are small rotors.

 

[hemi71x]

[FOR SALE] - **SLIDER** Type Caliper Mounts For The Standard 10.8" Inch Rotors.

I have "SLIDER TYPE" Disc Brake Caliper mounts that are used on the standard 10.8" inch diameter, disc brake rotors. For the A, B, E, Body spindles, and also F, M, J, Body spindles. Mounts have all been cleaned up in the solvent tank solution of Super Clean, then soaked off in a pail of...

www.forabodiesonly.com

If you might be looking for caliper mounts, i have these for sale.

 

[RemCharger]

http://[URL]https://www.forabodieso...nts-for-the-standard-10-8-inch-rotors.588696/

[/URL]

If you might be looking for caliper mounts, i have these for sale.

Thanks Jim, we have the parts just need to make sure it'll work

 

[gkent]

I'll vouch for hemi71x ... got my brackets from him many years ago.