Accel distributor end terminal

[hunt2elk]

Do any of you know where a guy can buy the 90* terminal end shown on the right in this picture? If you buy a full set of 9000 8mm wires, you get 8 included. My problem is that when buying just one wire, that end is not included.



http://www.summitracing.com/parts/acc-9001c/overview/
http://www.summitracing.com/parts/acc-170901c/overview/

 

[coloradodave]

I should have some of those. If so, I'll send you a couple. Give me 5 minutes.

- - - Updated - - -

PM sent. I had extras.

 

[hunt2elk]

Thanks Dave. I don't care what anybody says, FBBO is the absolute best Mopar site around. A great bunch of guys on here willing to help out when needed. Now if I can round up another 6, I will have it made lol. Anybody who has bought the 8 wire kit and used a MSD distributor will not need the ones I am looking for. I even called Accel asking about them, and was told they are not sold separately. A guy has to buy a kit with the 8 brass ends and 24 rubber boots.

 

[A383Wing]

NAPA has them also

 

[hunt2elk]

NAPA has them also

Never even thought to check with them, but I will.

 

[coloradodave]

Should have said you needed more. The 2 are on their way. If you can't find them at NAPA let me know and I'll repeat today's exercise...lol

 

[hunt2elk]

Just checked NAPA's website. It looks like they have some for 7mm, but nothing for 8mm. I'll have to stop in a store to be sure though.

 

[hunt2elk]

Thanks for all your help guys, I ran into a friend last night who says he has an extra 6 laying around that I can have. Life is good again :headbang: