Anyone running an Edelbrock RPM with an air grabber setup?

[wannadrag29]

Looking for information.
im running a 440 and im going to put a air grabber and need to know if anyone makes a baseplate for a 4bbl that will work with the edelbrock RPM manifold.
Thanks in advance.

 

[hunt2elk]

Unfortunately, no.

 

[moparjohnny]

Unfortunately, no.

you will have to use another low profile intake like weiand or one of the older chrysler intake that is aluminum.

 

[Dajkzo]

I have the same issue with going from a 383 to a 440 in my 1970 RR with an N96(air grabber) hood. Hughes has the manifold heights listed and the Torker II is the lowest. It compares well to the RPM in dyno tests. The Torker II outperforms the basic Performer in the dyno tests I've seen.
http://www.hughesengines.com/TechArticles/4portedintakemanifoldsupdated08272007.php

 

[wannadrag29]

Thanks for the reply's.