• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Are These Motor Mounts Mopar?

haywire 440

Full Speed Ahead
FBBO Gold Member
Local time
8:11 PM
Joined
Jun 30, 2017
Messages
1,738
Reaction score
2,251
Location
Central South
These are McQuey-Morris MM2227 and were given to me by a friend. I researched but couldn’t fine anything.
They are marked RH, right hand.
C3A07279-92AC-46E4-BDEF-52515CBE9AFF.jpeg


67293C9D-CB55-4C7E-B639-48E31A3C5A3A.jpeg


8939D881-8904-41EB-99F0-14D1D9293D26.jpeg
 
The friend thought they were Mopar, that was all I had to go on.
 
2227 is RH (passenger side)

And another good example of adds not including 1962. It fits those B bodies also.

20170302_161710-jpg.jpg
 
Some early '62's did not use these mounts because the early crossmember had a flat mount instead of "V" mount. I think they were like '61 and earlier mounts. The '62 Dart I had was like this. But, maybe a Canadian thing?
 
Some early '62's did not use these mounts because the early crossmember had a flat mount instead of "V" mount. I think they were like '61 and earlier mounts. The '62 Dart I had was like this. But, maybe a Canadian thing?

Would the flat mount be 318 specific? These mounts are for the Big Block.
 
66 to 72 B and C bodies, and 70 -74 E bodies used the same insulators. Right, left, big block. small block, all the same. The steel engine brackets were different between small and big blocks.
 
Auto Transport Service
Back
Top