Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Aside from the part # do you have the tip sizes like a .073x.060. I have an old Carter strip kit but don't see those #s in it. I have some Eddy rods from a Dual Quad set up I did and they will interchange with the Carter.
this carb works good and has been restored so I don’t want to open it up to change jets to eddys. This should fine tune it. I found a couple more to try that are richer than these, but these two are closer to the 16-575 it has now. Thanks though.
Yeah three step rods are hard to find all I have are 2s and nothing in the 063x051 or the 064x47. Think I used USA Carbs for the rods and jets, they have some real obscure parts for just about any carb ever made. Good Luck with the Hunt. I do have Carter jets in the kit give me a # and I will see if I have a pair. Is this for 1 or 2 carb setup?