irydebikes
Member
Looking for a good set of front leaf spring hangers for my '65 Belvedere II project. Thanks!
Chuck
Chuck
WTB B-Body Leaf Spring hangers
- Thread starter irydebikes
- Start date
- Status
Got the set from my 67 - have no clue if they are the same . . .
irydebikes
Member
Pretty certain they are, how much would you sell them for? Thanks!!!
Here's the spring holders from my 67 . . .
All sides so you can see the condition also note the they were marked
- single dot ( top one ) is from the driver side ( habit )
- 2 dots ( bottom one ) is from the passenger side
kept them as situated above
one side ( still same order )
last side ( still same order )
Little bit of pitting but they are very solid - as for a price . . . uh, $75 + the ride . . .
Let me know what you think . . .
Lelo 500
Well-Known Member
http://arengineering.com/home-page/spring-hangers/
Please notice 64-65 are different than 66-70 doesn't mean they won't work but they are listed different.
Please notice 64-65 are different than 66-70 doesn't mean they won't work but they are listed different.
irydebikes
Member
They’re different, but thanks!
irydebikes
Member
Been doing a bit more research/learning. Looks like the “front” dimension in the spring (eye to centering pin) is shorter than the 66+ springs...
I'll look for a pair I took off my 65 Dodge. Will post pictures, almost positive where they are.
If you want to buy from Jimmy-James go ahead he's close by.
irydebikes
Member
Tried to pm but says your inbox is full so I can’t message you...
- Status
Similar threads
