Dibbons
Well-Known Member
- Local time
- 11:40 PM
- Joined
- Nov 29, 2014
- Messages
- 4,733
- Reaction score
- 5,375
- Location
- La Paz, B.C.S., Mexico
I should have used a SEM product on my plastic door panels, but a couple of years ago the Rust-Oleum label claimed for plastic too.
Today the panels were off and needed very minor touch-up on the bottom edge. I used blue masking tape on the plastic ridge molded into the panel near the bottom where I figured the touch-up would not be obvious.
I carefully pulled the tape off an hour later, which took a little paint off here and there, making things worse instead of better. Serves me right for trying to do things half-***.
Today the panels were off and needed very minor touch-up on the bottom edge. I used blue masking tape on the plastic ridge molded into the panel near the bottom where I figured the touch-up would not be obvious.
I carefully pulled the tape off an hour later, which took a little paint off here and there, making things worse instead of better. Serves me right for trying to do things half-***.