Bolts for Crankshaft to Flexplate 383 Auto - 70 Charger

[rklewis1005]

Good morning, I was unable to find my original bolts (maybe the engine shop lost them). Anyway, I bought the set from Megaparts USA and they're too long. I may cut them down.

Flywheel Bolts 1964-74 340/383/440, Flywheels/Hardware, 110-C8217 Reproduction, NOS and Used Mopar Muscle Car Parts

I was wondering if someone had a source for the correct ones or a specification on the length of the originals??

Thanks
Ross

 

[Milo]

Is it a automatic or manual shift

 

[rklewis1005]

auto

 

[pnora]

The ones you ordered are flywheel not flex plate. ARP Pro Series Flexplate Bolt Kit

 

[65CopCar]

Are you talking flexplate to crank? For those, I am pretty sure I use ARP 200-2903. They are 0.500" long. For the flexplate to converter, sometimes I used the same but in the converters I have now I used 200-2902 which is 0.680" long. But I recently added spacers for better pump engagement and wanted longer bolts so went with a Ford ring gear application bolt which is 0.750" long ARP# 250-3003.

 

[rklewis1005]

Thanks all - I finally found my originals (2 hrs of digging) & using those.