Hubbarocks
Well-Known Member
Guys i am over thinking this? Doesn't look right to me , I suspect an issue unless this is normal. I plan on calling borgeson tomorrow. Installing new steering box , pitman arm & idler arm. When I put it all together on the k frame, via torque specs. The draw bar / center link is almost 1 inch lower on the pitman arm side. So it looks "kitty wumpis" I scatched my head for while and think I did something wrong... I took everything back apart and reinstall the original stuff compared to new & took measurements, then installed 1 pc at a time. The new pitman arm very close and idler arm is too. Mounting the new and oem box. I see the borgeson is almost 1/4" longer where the splines start. Which may be the whole issue?? See bunch of photos below.
I marked how it wants to sit with the borgenson box. It's best example I can show, hope you get the idea...
![20210726_204342.jpg 20210726_204342.jpg](https://www.forbbodiesonly.com/moparforum/data/attachments/1072/1072470-7ddf0c7991abd2fc6995730c0df1a680.jpg)
I marked how it wants to sit with the borgenson box. It's best example I can show, hope you get the idea...
![20210726_204342.jpg 20210726_204342.jpg](https://www.forbbodiesonly.com/moparforum/data/attachments/1072/1072470-7ddf0c7991abd2fc6995730c0df1a680.jpg)
Last edited: