FOUND Brake proportioning valve

Status
Not open for further replies.

Fast340cuda

Member
Feedback: 0 / 0 / 0
Local time
8:26 AM
Joined
Apr 20, 2020
Messages
19
Reaction score
2
Location
San Jose, CA
Looking for a brake proportioning valve to complete the front disc conversion on my project. I know reproductions are available but would prefer a nice original part if possible. I believe most 71 and up A or B body with disc/drum would work.

Let me know if you have a spare laying around that you wouldn’t mind selling.

Thanks!

9F0D9CA3-72F4-462B-B06F-79951D645E3E.jpeg
 

Fast340cuda

Member
Feedback: 0 / 0 / 0
Local time
8:26 AM
Joined
Apr 20, 2020
Messages
19
Reaction score
2
Location
San Jose, CA

Thanks for the reply! That looks like the one I have for my current 4 wheel drum set up.

My research shows there are 2 main types of blocks used starting in the late 60’s through the 70’s. The rectangular shaped distribution block was for 4 wheel drum (also used on 1967-1970ish a bodies with an additional hold off valve for the rear drums when used with factory front disc) or the “Texas” shaped proportioning valve for 71 and later drum/disc cars. I am looking for the Texas shaped unit.

DAECCF31-8CA1-4F81-B08C-F39552D910A2.jpeg
304D6876-B7A7-41FB-8F60-E34A419503BD.jpeg
 
Status
Not open for further replies.

Top